This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/974143/bq24161b-is-a-capacitor-required-on-pmidi-if-in-pin-is-not-used
我在仅 USB 输入的情况下使用的是 BQ24161B、没有与 IN 引脚连接。 在这种情况下 、是否需要 pmidi 上的4.7uF 电容器？
您好！
请将 pmidi 上的4.7uF 替换为0.1uF 电容器。
此致、
Jeff
