This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS2660:将 TPS26600替换为 TPS26602

Guru**** 2535150 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1006358/tps2660-replacing-tps26600-with-tps26602

器件型号:TPS2660
  1. TPS26602的 UVLO 迟滞是否低于 TPS26600的迟滞? 这是否符合数据表规格?  
  2. TPS26602的 OVP 引脚是否必须直接连接 到 RTN、或者18kR 到 RTN 的电阻是否足够低? 则电路可能保持不变!  

谢谢、再见

汉诺  

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Hanno、

    两个器件的 UVLO 迟滞相同。

     对于 TPS26602、从 OVP 引脚到 RTN 的18k 电阻应该可以。  

    此致、Rakesh