This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TLV759P:在 VIN 变为高电平之前、TLV759P EN 引脚是否为高电平

Guru**** 664280 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/967202/tlv759p-can-tlv759p-en-pin-have-high-before-vin-goes-high

器件型号:TLV759P

在用例中、EN 保持高电平、而 VIN 为低电平。 这是可以的吗? 可以是更长的周期。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!  

    这应该是可以的。 但是、当 Vin 确实导通时、瞬态响应将降级。  

     如需更多信息 、请参阅表1的7.4器件功能模式部分和7.4.3压降运行部分。  

    最棒的

    Juliette