This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/897067/bq25611d-may-i-ask-whether-the-peripheral-capacitance-resistance-parameters-of-bq25611d-are-set-reasonably
我是否可以询问 BQ25611D 的外设电容电阻参数是否设置合理？
这是可行的吗？ C218、C217。 直接连接到电池的电容器应采用软端电容器或2个串联电容器、彼此放置90°C 、以避免电容器破裂问题在部分短路和过热时发生故障、或通过泄漏电流对电池放电
原理图看起来不错。
C217和 C218并联连接到 BAT 引脚是正确的。 无需将它们串联。
