This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/895769/bq25601-to-keep-fast-charge-current-which-has-been-set-by-i2c
您好！
由 I2C 设置的快速充电电流值在 WDT 过期时设置为默认值。 是否有任何方法保留 I2C 设置的值？
此致、Taki
Taki、
为了使器 件保持在主机模式、主机必须在看门狗计时器到期前向 WD_RST 位写入1来复位看门狗计时器(设置看门狗_FAULT 位)、或通过设置看门狗位 REG05[5：4]= 00来禁用看门狗计时器。
谢谢、
宁。
