请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TPS62808 尊敬的 Sirs:
我发现、如果输出电流非常低、TPS62808输出电压将高于1.8V。(2mA)
与其他 E2E 帖子一样、启动仿真似乎没有问题。
但是、稳态仿真仍然具有错误的输出电压。
这也是一个短仿真时间问题吗?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
尊敬的 Peter/Davor:
我们已经解决了这个问题。 我已附上 pdf 供您参考。 问题在于器件进入 PFM 模式时的仿真时间。
我们将在下一个量产版本中在 TI.com 上更新这些更改。 我们将向您提供最新信息。
e2e.ti.com/.../WBDesign11912.pdf
谢谢、此致、
阿图尔