主题中讨论的其他器件: TPS65218、 BOOSTXL-TPS65218
您好!
你好。
客户要求提供以下链接中提到的 Beagle Bone Back 的软件资源。
请提供建议。 非常感谢。
此致、
Ray Vincentt
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好!
你好。
客户要求提供以下链接中提到的 Beagle Bone Back 的软件资源。
请提供建议。 非常感谢。
此致、
Ray Vincentt
尊敬的 Ray:
在 TPS65218D0的软件方面、我们提供了 IP-GUI 工具和 BoostXL-TPS65218、以帮助在开发阶段进行编程。 这两个器件均可在 TPS65218产品页面上找到、链接如下: TPS65218D0数据表、产品信息和支持|德州仪器 TI.com
下面链接 了有关将 BoostXL-TPS65218与 IP-GUI 结合使用以访问器件上的 I2C 寄存器的文档。
《BOOSTXL-TPS65218 EVM 用户指南》(TI.com)
TPS65218D0数据表中还有一个 I2C 操作部分(第45页)、编程部分(第48页)和寄存器映射(第50页)。
此致、
Garrett
尊敬的 Ray:
除了 Garrett 提供的信息外、以下还提供了 TPS65218D0 PMIC 驱动器的链接:
https://www.ti.com/tool/TPS65218SW-LINUX?keyMatch=TPS65218
谢谢、
Brenda
尊敬的 Ray:
我已经向我们的团队软件专家确认、除了共享资源之外、我们没有其他资源。 他为我提供了一个带有 TPS65218D0 Linux 驱动程序的 GitHub 链接(如下所示)、但该源文件是上周在 TI.com Brenda 上提供的工具中链接的文件之一。
https://github.com/torvalds/linux/blob/master/drivers/mfd/tps65218.c
我还将附上我认为是过去的一个相关主题、在这里、客户询问 TPS65218D0 EEPROM 编程和使用 uBoot 命令行。
此致、
Garrett