请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:LM2621 您好!
在 LM2621的数据表中、PGND 为引脚1、SGND 为引脚5。
但是、在同一数据表中的建议 PCB 布局中、显示了连接到电源接地的引脚5和连接到反馈信号接地的引脚1。
请告诉我引脚配置或建议的 PCB 布局是否正确。
以下是数据表的两个部分供您参考。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.