尊敬的 TI:
安装 LP50EVM GUI (修订版 A)后、我有一个客户面临启动错误。 他尝试使用两台笔记本电脑、但仍面临此问题。
这是他安装的软件:slvc713a.zip
安装后、单击 LP50时出现 EVM.exe 错误(问题):
是否可能发生此错误? 请提供建议。
谢谢、
赵阳
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
尊敬的 TI:
安装 LP50EVM GUI (修订版 A)后、我有一个客户面临启动错误。 他尝试使用两台笔记本电脑、但仍面临此问题。
这是他安装的软件:slvc713a.zip
安装后、单击 LP50时出现 EVM.exe 错误(问题):
是否可能发生此错误? 请提供建议。
谢谢、
赵阳
1) 1) 当用户在安装 GUI 后遇到以下错误时:
Windows 脚本主机
----------------------------------------------------
脚本:C:\Program Files\Texas Instruments\LP50\launcher\oneui_nw_launch.vbs
线路:30
字符:1.
错误:系统找不到指定的文件
代码:80070002
源:(空)
----------------------------------------------------
2) 2)转至位置 C:\Program Files\Texas Instruments\LP50\launcher\oneui_nw_launch.vbs 并在文本编辑器中打开文件"oneui_nw_launch.vbs"、如下所示。 将下面的红色平方文本从“C:\Program Files (x86)\Texas Instruments\TIAppRuntime\v2.0\nw.exe”更改为“C:\Program Files\Texas Instruments\TIAppRuntime\v2.0\nw.exe”
3) 3) 再次启动 GUI
这应该起作用。