主题中讨论的其他器件:CSD15571Q2
我发现不建议将此器件与大于1oz 的铜一起使用。 是否有类似的 FET (泄漏极低)可以处理2oz?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我发现不建议将此器件与大于1oz 的铜一起使用。 是否有类似的 FET (泄漏极低)可以处理2oz?
您好 Ben、
感谢您关注 TI FET。 PCB 铜厚度与影响焊盘尺寸的纵横比直接相关。 铜越厚、PCB 焊盘就越大。 因此、对于这个具有小焊盘的 FemtoFET、PCB 铜厚度将限制为1oz。 下面是 FemtoFET SMT 指南的链接。
https://www.ti.com/lit/ug/slra003d/slra003d.pdf
TI 提供采用2x2mm SON 封装的替代器件:CSD15571Q2或 CSD71571Q2。 请告诉我是否可以提供进一步的帮助。
此致、
John Wallace
TI FET 应用