This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/835025/ucc28221-use-one-channel-only
我能否仅使用一个通道(OUT1和 CS1) 并保持第二个通道(OUT2和 CS2)断开？
谢谢
Joe
Joe、您好！
是的、如果您愿意、只需选择使用一个通道即可。 我会将未使用的 CS 引脚拉至0V、并使输出保持开路。
此致
Peter
