This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/857346/tps27s100aevm-can-nc-pins-be-connected-to-ground
我想在 TPS27S100A 设计中将 NC 引脚1和引脚11接地、以便在需要时支持替代器件。 对于 TPS27S100A 而言、这是否会成为问题？
尊敬的 Jeff：
请勿将 NC 引脚连接到 GND。 为了使器件正常运行、这些引脚将保持悬空。
