This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ24160:充电状态寄存器不变

Guru**** 2382630 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/810766/bq24160-the-register-of-charge-status-does-not-change

器件型号:BQ24160

您好、TI 团队

该寄存器保持011、不会切换到101。
当充电电流被确认时、它在大约130mA 时被切换至0mA。
因此、我认为充电已完成。
我希望直接沟通、因为无法披露详细信息。
  
  
此致、
高志林
  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Koji、

    我已通过论坛请求友谊,以便我们能够私下交流。

    此致、

    Jeff