This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ27Z561-R2:如何校准是否在 SRN 上连接电池正极端子

Guru**** 2539500 points
Other Parts Discussed in Thread: BQ27Z561-R2

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1173091/bq27z561-r2-how-to-calibrate-if-connect-battery-positive-terminal-on-srn

器件型号:BQ27Z561-R2

根据原型中随附的原理图、电池负极连接在 SRN 上、而不是 BQ27Z561YPHR-R2中的 SRP 上。 它能否通过以反相格式读取数据来在软件中进行处理、尤其是校准?  

随附的原理图供您参考和查看。


e2e.ti.com/.../BQ27Z561YPHR_2D00_R2-Schematic.pdf

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!

    SRP 应始终连接到 Cell-。 如果连接反向、监测计会认为充电时正在放电。 检测电阻对于 bq27z561-R2至关重要、因为监测计使用 R-sense 测量电流并检测 CHG、Relax 和 DSG 状态。  

    我建议不要反向连接并遵循布局准则。

    此致、
    何塞·库瑟