This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/786302/bq24780s-bq24780s-idchg-function
尊敬的所有人：
BQ24780S 需要 IDCHG 功能、寄存器0x12 位3已设置1、但输出电压为0V、如果有好建议、谢谢！
你(们)好
我认为您的系统应该处于电池模式状态。
如果是、则应禁用低功耗模式、否则 IDCHG 引脚将无法输出以降低功耗。
请将 REG0x12[15]编程为0以使 IC 处于性能模式。
谢谢
