This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/600323/pmp10276-mosfet-instantly-blows-when-power-is-applied
我已根据参考设计 PMP10276构建了电源。
当我向电路板通电时、MOSFET Q1会立即冒烟。 我已经尝试断开 R7 (连接到 MOSFET 栅极的0欧姆电阻器)、它仍然会熔断。
我能想到的唯一问题是器件放置不当、但我已经检查过这种情况的次数超过了我可以计数的次数。
如果能就该问题提出任何建议、我们将不胜感激！
谢谢、
Derek
