This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [参考译文] [常见问题解答] TPS23751:APD 引脚能否在 PoE PD 控制器上保持悬空?

Guru**** 2315160 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/756772/faq-tps23751-can-apd-pin-left-floating-on-my-poe-pd-controller

器件型号:TPS23751

您好、达尔文、

对于 TI 的所有 PoE PD、即使 APD 有内部下拉电阻、建议在不使用 APD 的情况下将该引脚端接至 RTN 或 ARTN、这是一种良好的做法。 PoE PD 的数据表中也对此进行了说明。