This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS65651咨询

Guru**** 2582405 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/752895/tps65651-consulting

主题中讨论的其他器件:TPS65651

你好

当 TPS65651的输入引脚悬空时、我想检查在其输出引脚处添加外部反向电源是否会有不良风险

EXG.VI 悬空、在 VELVDD 上增加4.6V 的外部电压

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好 Fandy、

    我已就此主题通知了我们的专家。 请在2018年7月12日之前回复。

    谢谢、
    Aaron
  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好 Fandy、
    当器件没有输入电压时、不建议将外部电源连接到 TPS65651的输出引脚。 在典型应用中、输出引脚上可能会短暂存在一些电压、例如面板放电阶段的残余电压、但不建议将外部电源连接到输出引脚。
    此致、
    辽卡特