This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/591750/ref3225-the-enable-pin-is-not-valid
尊敬的、我的原理图如下所示、我希望 通过单个回跳来控制使能引脚、当使能引脚为3.3时、引脚5和6将输出2.5、但当 使能引脚为0时、 引脚5和6将输出2.5、因此我不知道原因
