This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] 如何在 slup263第15页中获得 Tdead 方程式

Guru**** 2331900 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/626842/how-to-obtain-tdead-equations-in-slup263-page-15

如何在 slup263第15页中获得 Tdead 方程式? 谢谢。

设计 LLC 谐振半桥电源转换器

e2e.ti.com/.../6014.slup263.pdf

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好、Harry、

    死区时间通常在电源上进行测量、然后进行调整以确保在所有工作条件下都达到 ZVS。 等式32 (b)是一个得到一个死区时间的近似值、这是设计的一个很好的起点。

    此致

    Peter