This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS7A4201:使能引脚输入阻抗

Guru**** 2380940 points
Other Parts Discussed in Thread: TPS7A4201
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/662098/tps7a4201-enable-pin-input-impedance

器件型号:TPS7A4201

您好!

您能否告诉我们 TPS7A4201的使能输入 EN 引脚内部是否存在任何电阻?

在第7.2节的方框图中、没有显示任何内容。

我们使用的是另一个 LDO、它具有开漏配置、不适合我们。

谢谢、Keith

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好、Keith、

    TPS7A4201没有专用的上拉或下拉电阻;因此、它被设计成一直驱动至逻辑高电平或逻辑低电平。 如果您的应用不需要单独启用 Vout 和 Vin、则可以将 EN 连接到 Vin。

    非常尊重、
    Ryan