This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS61236P:启动时间

Guru**** 2390755 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/723591/tps61236p-start-up-time

器件型号:TPS61236P

从 EN 引脚变为高电平到输出达到标称电压电平时、启动时间规格是多少?

谢谢、

Ken

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好 Ken、

    没有规格。 启动时间的时间。 它还与外部条件相关、例如电容器和负载。 大电容器和负载将增加启动时间。 请参阅第21页的图21。 启动时间通常为4.5ms