This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS7A4101:仿真结果

Guru**** 667810 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1187608/tps7a4101-simulation-results

器件型号:TPS7A4101

我在 WEBENCH 电源设计器中进行了仿真、如下所示。

在该仿真中、输入和输出电流的结果不正确、因为10mA 输入电流会产生50mA 输出电流。 这对于线性稳压器而言是不可能的。

您可以确认这一点吗?

此致、

Matthias

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Matthias、

    正确、对于线性稳压器、IOUT 不能大于 IIN。 请注意、Webench 不再受支持、因此我们无法为其提供大量支持。  

    此致、

    Nick