请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:BQ34Z100-G1 尊敬的所有人:
我 将 全睡眠等待时间设置为5并断开通信、测量 BQ34z100-G1 的最低功耗约80uA、等待一分钟。功耗仍约为80uA、 无法进一步降低。我想让 BQ34z100-G1进入全睡眠模式、但仍需设置?非常感谢。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
尊敬的所有人:
我 将 全睡眠等待时间设置为5并断开通信、测量 BQ34z100-G1 的最低功耗约80uA、等待一分钟。功耗仍约为80uA、 无法进一步降低。我想让 BQ34z100-G1进入全睡眠模式、但仍需设置?非常感谢。
您好、John、
您是否首先发送了 SET_FULLSLEEP:0x0010命令,以便监测计在进入睡眠模式后能够进入完全睡眠模式?
发送此命令可使 FULLSLEEP 位在进入睡眠模式时变为1。
请查看此帖子以了解更多信息: https://e2e.ti.com/support/power_management/battery_management/f/180/t/530216
此致、
Nabil