This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS799:TPS79933DRVT 降噪电容器

Guru**** 1826200 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/744076/tps799-tps79933drvt-noise-reduction-capacitor

器件型号:TPS799

尊敬的团队:

我们正在其中一种设计中使用 TI 的 TPS79933DRVT LDO。 我们只想知道将连接到引脚'NR'的降噪电容器(CNR)所需的最小额定电压。 它是否只需绕过最大值 噪声电压,如数据表中的图19所示?

感谢您的快速响应。

谢谢、此致、
Madhusoodana Bairy
Mistral 解决方案
班加罗尔
+91-9538618846

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    大家好、Madoodhusana、

    NR 电容器连接到 LDO 的内部基准。  因此、该电容器上的电压将为1.193V  

    非常尊重、

    Ryan