This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS543C20:RSP/RSN 开尔文感应

Guru**** 2345050 points
Other Parts Discussed in Thread: TPS543C20
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/742883/tps543c20-rsp-rsn-kelvin-sensing

器件型号:TPS543C20

数据表中指出、TPS543C20 RSP/RSN 感应线路应以开尔文感应方式进行差动布线。 输出负载电容是否需要4端子配置、或者是否足以将 RSP/RSN 从负载处的 VOUT 和 GND 上抽走? 此外、两条布线之间是否有任何匹配需求?

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好 Jeramie、
    最好在系统想要调节的位置(例如负载)抽头 RSP/RSN 信号。 只需以相同的长度和相邻的方式路由这些信号即可。
    套件