This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我针对不同的电路修改收集了一些仿真结果。 ckt1_plot 对应于 ckt1电路、 ckt2_plot 对应于 ckt2电路、ckt3_plot 对应于 ckt3电路。 按照 Youhao Xi 在 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1000376/lm5170-q1-lm5170-q1-external-gate-driver-ucc27712dr 论坛上提出的想法修改 ckt1和 ckt2。 ckt3是根据 Harry Hofner 在 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1125336/lm5170-q1-how-to-add-external-gate-driver 中提出的想法修改的。 上述非电路在 LM5170的 LO 和 HI 引脚中生成开关信号。 请建议进行修改、以便能够将 LM5170与 LMG1205和 GaN FET 耦合。
e2e.ti.com/.../ckt1_5F00_plot.pdf e2e.ti.com/.../ckt1.pdf e2e.ti.com/.../ckt2_5F00_plot.pdf e2e.ti.com/.../ckt2.pdf e2e.ti.com/.../ckt3_5F00_plot.pdf e2e.ti.com/.../ckt3.pdf e2e.ti.com/.../Driver-Connection-Simple-suggested-by--Youhao-Xi.pdf
另请参见 ckt1_plot 的缩放视图
尊敬的 Stefan:
感谢你的答复。 我的目标、所采取的步骤和困难的细节如下:
我的目标:
采取的步骤:
中 的电路1 LMG1205 PSpice 瞬态模型和 LM5170 PSpice 瞬态模型在 完成以下修改后合并:
在中 、LMG1205 PSpice 瞬态模型 和 LM5170 PSpice 瞬态模型 在 完成以下修改后合并:
中 的电路3 LMG1205 PSpice 瞬态模型和 LM5170 PSpice 瞬态模型在 完成以下修改后合并:
我将附加所有这三个项目。 仿真配置文件位于项目文件夹中。
此致、
Siddheswar Sen
e2e.ti.com/.../Project_5F00_ckt1.rar
e2e.ti.com/.../Project_5F00_ckt2.rar