This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LM2852:相位设计

Guru**** 2439560 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1191163/lm2852-phase-marign

器件型号:LM2852

你(们)好

让我通过使用 WEBENCH 来询问有关 LM2852XMXA-3.3的相位裕度。

客户正在使用 Cin、Cout 和 COIL 评估三种模式的相位裕度。

那么、哪个 条件最适合他们的系统?

我想说、所有系统中的相位裕度都足以满足其系统的需求。

此致

Tatsu

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好 Tatsu、

    条件1和2中的相补角看起来不错。 它在条件3中是一个位低电平。 因此建议不要使用该 COUT。

    此致、

    瓦伦