This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1235796/bq25622-how-to-configure-the-charging-current
大家好、
如何配置寄存器、以将充电电流设置为480mA/520mA/560mA？
您好、Morty、
请查看我的评论如下。
首先、由于数据表表表中显示的80mA 位步进、不能设置 ICHG = 520mA。
-要设置 ICHG = 480mA、请将180十六进制写入 REG0x02。
-要设置 ICHG = 560mA、请将1C0十六进制写入 REG0x02。
此致、
Garrett
