This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TLV716P:验证器件输出引脚

Guru**** 2553260 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1248867/tlv716p-verification-of-device-output-pins

器件型号:TLV716P

在 TLV716P3318器件上、我假定3.3V 位于标记为 OUT1 (1)的引脚上

1.8V 位于引脚标签 OUT2 (2)上。  我希望在发布设计之前验证、但无法

查找与此相关的任何文档。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Charles:

    抱歉。  您的假设是正确的。

    这里是意外删除的该数据表上一修订版中的表格。  我已将此添加到数据表更正日志中、此更正日志将在本数据表的下一次修订期间进行更正。

    谢谢。

    斯蒂芬