This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS2116:不使用 STATUS 引脚时处理状态引脚

Guru**** 2387830 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1247379/tps2116-handling-status-pin-when-not-using-status-pin

器件型号:TPS2116

尊敬的专家:

由于对电流消耗的严格限制、我担心状态引脚上拉电阻器的电流消耗。
如果未使用 STATUS 引脚、则 STATUS 引脚与 GND 短接是否没有问题?

感谢您的帮助。

此致、

竹村太人

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Takemura-San、  

    是的、您可以将 STATUS 引脚短接至 GND。

    此致、  

    伊丽莎白