This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LP55231:启动时的复位处理

Guru**** 2387080 points
Other Parts Discussed in Thread: LP55231
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1244824/lp55231-reset-processing-at-startup

器件型号:LP55231

您好!
我有一个关于 LP55231上电复位过程的问题。
当 EN 引脚处于"L"状态或 EN 引脚处于"H"状态时、哪个引脚向复位寄存器(3Dh)写入 FF?
请告诉我您对以下 A)或 B)中哪一项对于启动过程是正确的意见。

a)
EN 引脚:H

将 FF 写入复位寄存器

CHIP_EN:H

b)
将 FF 写入复位寄存器

EN 引脚:H

CHIP_EN:H

此致、

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!

    实际上、 当 器件自动上电时、器件将复位。

    如果您希望使用复位寄存器让器件进入复位模式、则可以按序列字母"B"排序。

    谢谢!