This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS22992:偏置电压要求和保持 PG 悬空

Guru**** 1818760 points
Other Parts Discussed in Thread: TPS22992, TPS22916
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1335312/tps22992-bias-voltage-requirements-and-leaving-pg-floating

器件型号:TPS22992
主题中讨论的其他器件: TPS22916

您好!

关于 TPS22992/TI 的负载开关器件、我有两个问题:

1.我们支持1.2V 的最佳选择是什么? 目前、这个器件需要一个至少为1.5V 的偏置电压、但是我想知道我们使用什么能够只使用1.2V 电源轨。 我看到过 TPS22916、但其电流限制为2A。

2. PG 引脚是否可以在 TPS22992RXPR 上保持悬空?

谢谢!

马修·巴维尔