This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LM5163-Q1:LM5163-Q1

Guru**** 2502205 points
Other Parts Discussed in Thread: LM5163

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1340022/lm5163-q1-lm5163-q1

器件型号:LM5163-Q1
主题中讨论的其他器件:LM5163

e2e.ti.com/.../DC-DC-Converter_2D00_Ti.xlsx

如果文件无法访问、请在下面找到问题

系统输入

VIN = 16V 至32V

Iout = 0.2A

VOUT = 12V

系统输入会馈送到 WEBENCH 设计器中、设计人员建议的原理图为  

在 simetrix 中绘制的原理图  

即使开关适当、输出电压也不稳定

您能支持我们确定问题吗?

https://docs.google.com/spreadsheets/d/1620b7fTfap6h3FqHOqMDAVBq-gXDhlySIxyl8IF3Mv0/edit#gid=0

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    大家好、A.P.

    感谢您使用 LM5163进行设计。  抱歉,我们的服务不允许我下载您的 google doc 文件。

    总之、我不确定您将 pspice 模型转移到 Simplis 是否会导致任何错误。  您是否可以使用 TINA、PSpice 或 PSpice for TI 进行仿真?

    谢谢。

    友好