This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS628502-Q1:PSpice 仿真

Guru**** 2516520 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1376381/tps628502-q1-pspice-simulation

器件型号:TPS628502-Q1

工具与软件:

我将使用 TPS628502-Q1 PSpice 瞬态模型、并想确定相位裕度和 dB 增益。 但是、在我的稳态仿真中、输出电压的 dB 增益非常低。  我将以 dB 的电压和电压探头相位幅度来探测 VOUT 和 VFB。 我还要将迹线绘制为 DB (V (VOUT)/V (FB))和 P (V (VOUT / V (FB))。  非常感谢您提供任何反馈或建议。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Vasti、

    PSpice 瞬态模型无法向您提供该数据。

    您可以对循环数据使用 Simplis 交流模型。

    谢谢!

    法尔海恩