This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ25750:自动反向模式时序

Guru**** 2771175 points

Other Parts Discussed in Thread: BQ25750

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1397704/bq25750-auto-reverse-mode-timing

器件型号:BQ25750

工具与软件:

您好!

当 BQ25750启用自动反向模式时、Vac 超过 ACUV 阈值与降压/升压转换器将 SYS 电压恢复到 VSYS_REV 之间的典型延迟时间是多少? 本质上是 VSYS 上的斜升时间数据表中的图8.6、标记为"反向模式开启"周期。

我知道这在某种程度上取决于电池电压、目标 VSYS_REV 值和负载、但您是否有一些典型值要分享?  

一些显示这种过渡到数据表第9.2.1.3节"应用曲线"的实验波形将会很好!

感谢你的帮助。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    你好、 Mickael、

    我看到的典型值在50µs 附近。

    我将在数据表中看到有关应用曲线的各种功能。

    此致、
    埃森·加洛韦