This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ25792:当显示 VAC 时、BATFET 会关闭和关断模式

Guru**** 2771175 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1399902/bq25792-batfet-turn-off-and-shut-down-mode-when-presenting-vac

器件型号:BQ25792

工具与软件:

大家好、团队成员:

标题有两个问题。

1.可以通过寄存器关闭内部 BATFET 吗? 从该线程中、 REG1D 为只读

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1386328/bq25792-don-t-let-battery-provide-the-power-when-it-lower-than-specific-voltage/5301326#5301326

2.我要检查我们是否可以在有 VAC 输入时进入关断模式。

此致、

罗伊

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Roy:

    关于1、不  BAT 和 SYS 之间总是有一个二极管、因此需要外部 shipFET。

    关于2、不  运输和关断模式要求 VACx 低于 UVLO (即无输入电源)。

    此致、

    Jeff