[参考译文] BQ25611D：Linux 内核6.6中出现错误

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1452626/bq25611d-error-in-linux-kernel-6-6

工具与软件：

嗨、团队：

客户将 Linux 代码插入 Linux 内核6.6并看到错误。

请帮助检查驱动程序中是否存在任何问题。

bq256xx_charger.c«电源«电源«驱动程序- kernel/git/Torvalds/linux.git - Linux 内核源树

# modprobe bq256xx_charger
bq256xx-charger 0-006b：电源寄存器充电器发生故障
bq256xx-charger 0-006b：无法注册电源
bq256xx-charger：0-006b 的探测失败、出现错误-22


+                                   CHARGER_bq256xx：CHARGER_bq256xx@6B｛
+                                             pinctrl-0 =<&pinctrl_charger_int_default>；
+                                             兼容="ti、bq25611d"；
+                                             chargerInt-GPIO =<&pioA PIN_PD11 GPIO_ACTIVE_LOW>；
+                                             ti、输入电流限制=<1500000>；//15000ma
+                                             ti、充电电流=<512000>；// 512mA
+                                             ti、电池稳压电压=<4208000>；//充电电压限制
+                                             ti、terminal-current =<64000>；// Termination current limit
+                                             ti、预充电电流=<128000>；//预充电电流限制
+                                             ti、minimal-sys-voltage =<3600000>；//最小系统电压限制
+                                             ti、boost-voltage =<5126000>；//升压模式电压调节
+                                             reg =<0x6b>；
+                                   }；

谢谢！

LEO