This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LMR38010-Q1:数据表中的错误公式

Guru**** 2386530 points
Other Parts Discussed in Thread: LMR38010-Q1
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1460397/lmr38010-q1-faulty-equation-in-datasheet

器件型号:LMR38010-Q1

工具与软件:

在 LMR38010-Q1的数据表(SNVSC72B–2023年2月–2024年1月修订)中:

 公式10 似乎是错误的。 按照 公式计算、所需的电感随着电流的增加而降低。 我不认为,这是好的。

您能否提供正确的方程式?

提前感谢!

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Thomas:

    该公式用于根据占负载电流百分比的可接受纹波来选择电感。 电感值决定了纹波电流峰峰值。 如果负载电流增大、则可接受的纹波量也会增加(因为它设置为负载电流的百分比)。 因此、随着负载电流增加、可以使用更小的电感器、因为可以接受更高的峰峰值纹波。

    此致、

    Niranjan