请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。
器件型号：TDA2Sx 主题中讨论的其他器件： AWR2243、 DRA742
您好 TI 专家：
目前、我们使用贵公司的 AWR2243 EVM 开发板、而 TDA2SX 用于数据收集。 但是、mmwsstudio 软件仅提供软件刷新包、
请提供与机器刷牙包相对应的 SDK 源代码包。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好专家：
1.安装 MMWAVE_STUDIO_03_00_00_14软件
安装后、将在 C：\ti\mmwave_studio_03_00_14\mmWaveStudio\PlatformBinals\TDA2Firmware\sdimage_3_7_1.img.xz 路径中生成映像包
3.我需要与此映像包（sdimage_3_7_1_1.img.xz）相对应的源代码
谢谢！~
你(们)好
您能帮我找到与 DRA74x 级联 EVM 相对应的 uboot 源代码吗？ 我的本地源代码打印"电路板：DRA74x EVM 修订版 H.4"
预期打印：“Board： DRA74x Cascade EVM REV H.4”
[01：16：11：31：14]U-Boot 2016.05-00018-g6bc25a5 (2019年8月5日- 14：43：03 +0530)
[01：16：11：31：14]
[01：16：11：31：14]CPU：DRA752-GP ES2.0
[01：16：11：31：14]型号：TI DRA742
[01：16：11：31：14]电路板：DRA74x 级联 EVM 修订版 H.4
[01：16：11：31：14] DRAM：4 GiB
[01：16：11：31：14]MMC：I2C_WRITE：等待数据 ACK 时出错(STATUS=0x116)
Development board serial port log output： [01:16:11:30:39]U-Boot SPL 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03) [01:16:11:30:39]DRA752-GP ES2.0 [01:16:11:30:39]no pinctrl for hs200_1_8v [01:16:11:30:39]no pinctrl for ddr_1_8v [01:16:11:30:39]Card did not respond to voltage select! [01:16:11:30:39]*** Warning - MMC init failed, using default environment [01:16:11:30:39] [01:16:11:30:39]Trying to boot from MMC1 [01:16:11:30:39]reading dra7-ipu2-fw.lzop [01:16:11:30:39]spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 [01:16:11:30:39]spl: error reading image dra7-ipu2-fw.lzop, err - -1 [01:16:11:30:39]Error loading remotecore IPU2!,Continuing with boot ... [01:16:11:30:39]reading dra7-dsp1-fw.lzop [01:16:11:30:39]spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 [01:16:11:30:39]spl: error reading image dra7-dsp1-fw.lzop, err - -1 [01:16:11:30:39]Error loading remotecore DSP1!,Continuing with boot ... [01:16:11:30:39]reading dra7-dsp2-fw.lzop [01:16:11:30:39]spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 [01:16:11:30:39]spl: error reading image dra7-dsp2-fw.lzop, err - -1 [01:16:11:30:39]Error loading remotecore DSP2!,Continuing with boot ... [01:16:11:30:39]reading dra7-ipu1-fw.lzop [01:16:11:30:39]spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 [01:16:11:30:39]spl: error reading image dra7-ipu1-fw.lzop, err - -1 [01:16:11:30:39]Error loading remotecore IPU1!,Continuing with boot ... [01:16:11:30:39]spl: falcon_args_file not set in environment, falling back to default [01:16:11:30:39]reading single-stage-boot.dtb [01:16:11:30:39]spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1 [01:16:11:30:39]reading u-boot.img [01:16:11:30:39]reading u-boot.img [01:16:11:30:39]reading u-boot.img [01:16:11:30:39]reading u-boot.img [01:16:11:30:40] [01:16:11:30:40] [01:16:11:30:40]U-Boot 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03 +0530) [01:16:11:30:40] [01:16:11:30:40]CPU : DRA752-GP ES2.0 [01:16:11:30:40]Model: TI DRA742 [01:16:11:30:40]Board: DRA74x Cascade EVM REV H.4 [01:16:11:30:40]DRAM: 4 GiB [01:16:11:30:40]MMC: i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:40]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:40]OMAP SD/MMC: 0, OMAP SD/MMC: 1 [01:16:11:30:40]Card did not respond to voltage select! [01:16:11:30:40]*** Warning - MMC init failed, using default environment [01:16:11:30:40] [01:16:11:30:40]Card did not respond to voltage select! [01:16:11:30:40]ERROR: invalid mmc device [01:16:11:30:40] [01:16:11:30:40]at arch/arm/cpu/armv7/omap-common/utils.c:193/mmc_get_part_size() [01:16:11:30:40]Warning: fastboot.userdata_size: unable to calc [01:16:11:30:40]SCSI: SATA link 0 timeout. [01:16:11:30:40]AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [01:16:11:30:40]flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst [01:16:11:30:40]scanning bus for devices... [01:16:11:30:40]Found 0 device(s). [01:16:11:30:40]Net: Could not get PHY for ethernet@48484000: addr 2 [01:16:11:30:40] [01:16:11:30:40]Warning: ethernet@48484000 using MAC address from ROM [01:16:11:30:40]eth0: ethernet@48484000 [01:16:11:30:42]Hit any key to stop autoboot: 0 [01:16:11:30:42]## Error: "board_findfdt" not defined [01:16:11:30:42]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:42]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:42]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:42]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:42]switch to partitions #0, OK [01:16:11:30:42]mmc0 is current device [01:16:11:30:42]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:42]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:42]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:42]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:42]SD/MMC found on device 0 [01:16:11:30:42]reading boot.scr [01:16:11:30:42]** Unable to read file boot.scr ** [01:16:11:30:42]reading uEnv.txt [01:16:11:30:42]185 bytes read in 3 ms (59.6 KiB/s) [01:16:11:30:43]Loaded env from uEnv.txt [01:16:11:30:43]Importing environment from mmc0 ... [01:16:11:30:43]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:43]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:43]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:43]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:43]switch to partitions #0, OK [01:16:11:30:43]mmc0 is current device [01:16:11:30:43]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:43]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:43]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:30:43]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:30:43]SD/MMC found on device 0 [01:16:11:30:43]3577032 bytes read in 192 ms (17.8 MiB/s) [01:16:11:30:43]107792 bytes read in 54 ms (1.9 MiB/s) [01:16:11:30:43]Booting from mmc0 ... [01:16:11:30:43]Kernel image @ 0x82000000 [ 0x000000 - 0x3694c8 ] [01:16:11:30:43]## Flattened Device Tree blob at 88000000 [01:16:11:30:43] Booting using the fdt blob at 0x88000000 [01:16:11:30:43] Loading Device Tree to 8ffe2000, end 8ffff50f ... OK [01:16:11:30:43] [01:16:11:30:43]Starting kernel ... [01:16:11:30:43] [01:16:11:30:46][ 0.000000] Booting Linux on physical CPU 0x0 [01:16:11:30:46][ 0.000000] Initializing cgroup subsys cpuset [01:16:11:30:46][ 0.000000] Initializing cgroup subsys cpu [01:16:11:30:46][ 0.000000] Initializing cgroup subsys cpuacct [01:16:11:30:46][ 0.000000] Linux version 4.4.84-00041-g84382ab (x0284921@bangvideoapps02) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Mon Aug 5 14:52:40 IST 2019 [01:16:11:30:46][ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [01:16:11:30:46][ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [01:16:11:30:46][ 0.000000] Machine model: TI DRA742 Cascade Radar Board [01:16:11:30:46][ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [01:16:11:30:46][ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [01:16:11:30:46][ 0.000000] Reserved memory: regions without no-map are not yet supported [01:16:11:30:46][ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [01:16:11:30:46][ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [01:16:11:30:46][ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [01:16:11:30:46][ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [01:16:11:30:46][ 0.000000] Reserved memory: regions without no-map are not yet supported [01:16:11:30:46][ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [01:16:11:30:46][ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [01:16:11:30:46][ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [01:16:11:30:46][ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [01:16:11:30:46][ 0.000000] Reserved memory: regions without no-map are not yet supported [01:16:11:30:46][ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [01:16:11:30:46][ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [01:16:11:30:46][ 0.000000] Reserved memory: regions without no-map are not yet supported [01:16:11:30:46][ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000 [01:16:11:30:46][ 0.000000] Forcing write-allocate cache policy for SMP [01:16:11:30:46][ 0.000000] Memory policy: Data cache writealloc [01:16:11:30:46][ 0.000000] OMAP4: Map 0x000000027fd00000 to fe600000 for dram barrier [01:16:11:30:46][ 0.000000] DRA752 ES2.0 [01:16:11:30:46][ 0.000000] PERCPU: Embedded 11 pages/cpu @f2f1e000 s14912 r8192 d21952 u45056 [01:16:11:30:46][ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025330 [01:16:11:30:46][ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=3cc717e1-02 rw rootwait ip=none cma=64M vmalloc=128M [01:16:11:30:46][ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [01:16:11:30:46][ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [01:16:11:30:46][ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [01:16:11:30:46][ 0.000000] Memory: 2439424K/4109312K available (6671K kernel code, 320K rwdata, 2396K rodata, 336K init, 290K bss, 1424128K reserved, 245760K cma-reserved, 2167808K highmem) [01:16:11:30:46][ 0.000000] Virtual kernel memory layout: [01:16:11:30:46][ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [01:16:11:30:46][ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [01:16:11:30:46][ 0.000000] vmalloc : 0xf8000000 - 0xff800000 ( 120 MB) [01:16:11:30:46][ 0.000000] lowmem : 0xc0000000 - 0xf7800000 ( 888 MB) [01:16:11:30:46][ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [01:16:11:30:46][ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [01:16:11:30:46][ 0.000000] .text : 0xc0008000 - 0xc08e302c (9069 kB) [01:16:11:30:46][ 0.000000] .init : 0xc08e4000 - 0xc0938000 ( 336 kB) [01:16:11:30:46][ 0.000000] .data : 0xc0938000 - 0xc0988220 ( 321 kB) [01:16:11:30:46][ 0.000000] .bss : 0xc098a000 - 0xc09d2880 ( 291 kB) [01:16:11:30:46][ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [01:16:11:30:46][ 0.000000] Preemptible hierarchical RCU implementation. [01:16:11:30:46][ 0.000000] Build-time adjustment of leaf fanout to 32. [01:16:11:30:46][ 0.000000] NR_IRQS:16 nr_irqs:16 16 [01:16:11:30:46][ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [01:16:11:30:46][ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [01:16:11:30:46][ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [01:16:11:30:47][ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [01:16:11:30:47][ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [01:16:11:30:47][ 0.000015] Switching to timer-based delay loop, resolution 162ns [01:16:11:30:47][ 0.000331] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [01:16:11:30:47][ 0.000338] OMAP clocksource: 32k_counter at 32768 Hz [01:16:11:30:47][ 0.000786] Console: colour dummy device 80x30 [01:16:11:30:47][ 0.000803] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [01:16:11:30:47][ 0.000809] This ensures that you still see kernel messages. Please [01:16:11:30:47][ 0.000814] update your kernel commandline. [01:16:11:30:47][ 0.000827] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [01:16:11:30:47][ 0.000840] pid_max: default: 32768 minimum: 301 [01:16:11:30:47][ 0.000941] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [01:16:11:30:47][ 0.000951] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [01:16:11:30:47][ 0.001496] Initializing cgroup subsys io [01:16:11:30:47][ 0.001512] Initializing cgroup subsys memory [01:16:11:30:47][ 0.001538] Initializing cgroup subsys devices [01:16:11:30:47][ 0.001551] Initializing cgroup subsys freezer [01:16:11:30:47][ 0.001562] Initializing cgroup subsys perf_event [01:16:11:30:47][ 0.001573] Initializing cgroup subsys pids [01:16:11:30:47][ 0.001600] CPU: Testing write buffer coherency: ok [01:16:11:30:47][ 0.001794] /cpus/cpu@0 missing clock-frequency property [01:16:11:30:47][ 0.001810] /cpus/cpu@1 missing clock-frequency property [01:16:11:30:47][ 0.001820] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [01:16:11:30:47][ 0.001853] Setting up static identity map for 0x80008380 - 0x800083e0 [01:16:11:30:47][ 0.080060] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [01:16:11:30:47][ 0.080129] Brought up 2 CPUs [01:16:11:30:47][ 0.080142] SMP: Total of 2 processors activated (24.59 BogoMIPS). [01:16:11:30:47][ 0.080149] CPU: All CPU(s) started in HYP mode. [01:16:11:30:47][ 0.080154] CPU: Virtualization extensions available. [01:16:11:30:47][ 0.080533] devtmpfs: initialized [01:16:11:30:47][ 0.109565] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [01:16:11:30:47][ 0.110550] omap_hwmod: l3_main_2 using broken dt data from ocp [01:16:11:30:47][ 0.314692] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [01:16:11:30:47][ 0.314714] futex hash table entries: 512 (order: 3, 32768 bytes) [01:16:11:30:47][ 0.319662] pinctrl core: initialized pinctrl subsystem [01:16:11:30:47][ 0.320577] NET: Registered protocol family 16 [01:16:11:30:47][ 0.321518] DMA: preallocated 256 KiB pool for atomic coherent allocations [01:16:11:30:47][ 0.350242] cpuidle: using governor ladder [01:16:11:30:47][ 0.380265] cpuidle: using governor menu [01:16:11:30:47][ 0.388820] OMAP GPIO hardware version 0.1 [01:16:11:30:47][ 0.392769] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [01:16:11:30:47][ 0.408201] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [01:16:11:30:47][ 0.408213] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [01:16:11:30:47][ 0.417316] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [01:16:11:30:47][ 0.417326] hw-breakpoint: maximum watchpoint size is 8 bytes. [01:16:11:30:47][ 0.417797] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [01:16:11:30:47][ 0.417807] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [01:16:11:30:47][ 0.418380] OMAP DMA hardware revision 0.0 [01:16:11:30:47][ 0.461501] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [01:16:11:30:47][ 0.462638] edma 43300000.edma: memcpy is disabled [01:16:11:30:47][ 0.467376] edma 43300000.edma: TI EDMA DMA engine driver [01:16:11:30:47][ 0.471442] omap-iommu 40d01000.mmu: 40d01000.mmu registered [01:16:11:30:47][ 0.471628] omap-iommu 40d02000.mmu: 40d02000.mmu registered [01:16:11:30:47][ 0.471786] omap-iommu 58882000.mmu: 58882000.mmu registered [01:16:11:30:47][ 0.471944] omap-iommu 55082000.mmu: 55082000.mmu registered [01:16:11:30:47][ 0.472217] omap-iommu 41501000.mmu: 41501000.mmu registered [01:16:11:30:47][ 0.472418] omap-iommu 41502000.mmu: 41502000.mmu registered [01:16:11:30:47][ 0.475439] palmas 0-0058: IRQ missing: skipping irq request [01:16:11:30:47][ 0.490896] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [01:16:11:30:47][ 0.552784] pcf857x: probe of 0-0020 failed with error -121 [01:16:11:30:47][ 0.553036] pcf857x: probe of 0-0021 failed with error -121 [01:16:11:30:47][ 0.553908] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [01:16:11:30:47][ 0.554313] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [01:16:11:30:47][ 0.554512] media: Linux media interface: v0.10 [01:16:11:30:47][ 0.554565] Linux video capture interface: v2.00 [01:16:11:30:47][ 0.554606] pps_core: LinuxPPS API ver. 1 registered [01:16:11:30:47][ 0.554613] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [01:16:11:30:47][ 0.554642] PTP clock support registered [01:16:11:30:47][ 0.554693] EDAC MC: Ver: 3.0.0 [01:16:11:30:47][ 0.555448] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [01:16:11:30:47][ 0.555737] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [01:16:11:30:47][ 0.556062] Advanced Linux Sound Architecture Driver Initialized. [01:16:11:30:47][ 0.556929] clocksource: Switched to clocksource arch_sys_counter [01:16:11:30:47][ 0.567572] NET: Registered protocol family 2 [01:16:11:30:47][ 0.568077] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [01:16:11:30:47][ 0.568140] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [01:16:11:30:47][ 0.568265] TCP: Hash tables configured (established 8192 bind 8192) [01:16:11:30:47][ 0.568311] UDP hash table entries: 512 (order: 2, 16384 bytes) [01:16:11:30:47][ 0.568342] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [01:16:11:30:47][ 0.568484] NET: Registered protocol family 1 [01:16:11:30:47][ 0.568795] RPC: Registered named UNIX socket transport module. [01:16:11:30:47][ 0.568804] RPC: Registered udp transport module. [01:16:11:30:47][ 0.568811] RPC: Registered tcp transport module. [01:16:11:30:47][ 0.568817] RPC: Registered tcp NFSv4.1 backchannel transport module. [01:16:11:30:47][ 0.569796] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [01:16:11:30:47][ 0.579772] squashfs: version 4.0 (2009/01/31) Phillip Lougher [01:16:11:30:47][ 0.580415] NFS: Registering the id_resolver key type [01:16:11:30:47][ 0.580444] Key type id_resolver registered [01:16:11:30:47][ 0.580451] Key type id_legacy registered [01:16:11:30:47][ 0.580509] ntfs: driver 2.1.32 [Flags: R/O]. [01:16:11:30:47][ 0.581779] bounce: pool size: 64 pages [01:16:11:30:47][ 0.581940] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [01:16:11:30:47][ 0.581955] io scheduler noop registered [01:16:11:30:47][ 0.581967] io scheduler deadline registered [01:16:11:30:47][ 0.582001] io scheduler cfq registered (default) [01:16:11:30:47][ 0.587490] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [01:16:11:30:47][ 0.591013] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [01:16:11:30:47][ 0.591026] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [01:16:11:30:47][ 0.591059] IO 0x20003000..0x20012fff -> 0x00000000 [01:16:11:30:47][ 0.591081] MEM 0x20013000..0x2fffffff -> 0x20013000 [01:16:11:30:47][ 0.591292] dra7-pcie 51000000.pcie_rc: CFG 'Bus Master Enable' change [01:16:11:30:47][ 0.591301] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [01:16:11:30:47][ 0.618329] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [01:16:11:30:47][ 0.618342] pci_bus 0000:00: root bus resource [bus 00-ff] [01:16:11:30:47][ 0.618352] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [01:16:11:30:47][ 0.618362] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [01:16:11:30:47][ 0.618424] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [01:16:11:30:47][ 0.618441] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [01:16:11:30:47][ 0.618466] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [01:16:11:30:47][ 0.618480] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [01:16:11:30:47][ 0.618501] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [01:16:11:30:47][ 0.618516] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [01:16:11:30:47][ 0.618819] PCI: bus0: Fast back to back transfers disabled [01:16:11:30:47][ 0.637017] PCI: bus1: Fast back to back transfers disabled [01:16:11:30:47][ 0.637144] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [01:16:11:30:47][ 0.637160] pci 0000:00:00.0: BAR 8: assigned [mem 0x20200000-0x202fffff] [01:16:11:30:47][ 0.637170] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [01:16:11:30:47][ 0.637185] pci 0000:01:00.0: BAR 0: assigned [mem 0x20200000-0x20203fff 64bit] [01:16:11:30:47][ 0.637232] pci 0000:00:00.0: PCI bridge to [bus 01] [01:16:11:30:47][ 0.637244] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff] [01:16:11:30:47][ 0.637456] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [01:16:11:30:47][ 0.637466] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [01:16:11:30:47][ 0.699180] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [01:16:11:30:47][ 0.702558] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 202, base_baud = 3000000) is a 8250 [01:16:11:30:47][ 1.802518] console [ttyS0] enabled [01:16:11:30:47][ 1.806910] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 203, base_baud = 3000000) is a 8250 [01:16:11:30:47][ 1.816617] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 204, base_baud = 3000000) is a 8250 [01:16:11:30:47][ 1.826643] [drm] Initialized drm 1.1.0 20060810 [01:16:11:30:47][ 1.832205] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [01:16:11:30:47][ 1.838892] [drm] No driver support for vblank timestamp query. [01:16:11:30:47][ 1.845018] [drm] Initialized vdrm 1.0.0 20110917 on minor 0 [01:16:11:30:47][ 1.852165] OMAP DSS rev 6.1 [01:16:11:30:47][ 1.855906] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [01:16:11:30:47][ 1.871552] loop: module loaded [01:16:11:30:47][ 1.875091] vmemexp device MAJOR num = 245 [01:16:11:30:47][ 1.879244] vmemexp class registered [01:16:11:30:47][ 1.882957] /dev/vmemexp device registered [01:16:11:30:47][ 1.887089] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [01:16:11:30:47][ 1.892622] nvme 0000:01:00.0: enabling device (0140 -> 0142) [01:16:11:30:47][ 1.899044] nand: No NAND device found [01:16:11:30:47][ 1.902815] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [01:16:11:30:47][ 1.911930] m25p80 spi32766.0: found n25q00, expected s25fl256s1 [01:16:11:30:47][ 1.918053] m25p80 spi32766.0: n25q00 (131072 Kbytes) [01:16:11:30:47][ 1.923185] 7 ofpart partitions found on MTD device spi32766.0 [01:16:11:30:47][ 1.929065] Creating 7 MTD partitions on "spi32766.0": [01:16:11:30:47][ 1.934227] 0x000000000000-0x000000040000 : "QSPI.SPL" [01:16:11:30:47][ 1.950385] 0x000000040000-0x000000140000 : "QSPI.u-boot" [01:16:11:30:47][ 1.966697] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [01:16:11:30:47][ 1.983665] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [01:16:11:30:47][ 2.000348] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [01:16:11:30:47][ 2.017877] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [01:16:11:30:47][ 2.031006] nvme0n1: p1 [01:16:11:30:47][ 2.034298] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [01:16:11:30:47][ 2.052185] libphy: Fixed MDIO Bus: probed [01:16:11:30:48][ 2.106961] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [01:16:11:30:48][ 2.113088] libphy: 48485000.mdio: probed [01:16:11:30:48][ 2.119875] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver TI DP83867 [01:16:11:30:48][ 2.128823] cpsw 48484000.ethernet: Detected MACID = b4:52:a9:3b:b1:16 [01:16:11:30:48][ 2.135468] cpsw 48484000.ethernet: cpts: overflow check period 800 [01:16:11:30:48][ 2.142444] cpsw 48484000.ethernet: cpsw: Detected MACID = b4:52:a9:3b:b1:17 [01:16:11:30:48][ 2.151067] mousedev: PS/2 mouse device common for all mice [01:16:11:30:48][ 2.167285] i2c /dev entries driver [01:16:11:30:48][ 2.176043] omap_hsmmc 4809c000.mmc: Got CD GPIO [01:16:11:30:48][ 2.227511] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [01:16:11:30:48][ 2.233898] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [01:16:11:30:48][ 2.247076] evm_3v3_sw: supplied by sysen1 [01:16:11:30:48][ 2.307766] ledtrig-cpu: registered to indicate activity on CPUs [01:16:11:30:48][ 2.317864] aic_dvdd: supplied by evm_3v3_sw [01:16:11:30:48][ 2.323100] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [01:16:11:30:48][ 2.330616] NET: Registered protocol family 10 [01:16:11:30:48][ 2.345930] sit: IPv6 over IPv4 tunneling driver [01:16:11:30:48][ 2.351140] NET: Registered protocol family 17 [01:16:11:30:48][ 2.355819] Key type dns_resolver registered [01:16:11:30:48][ 2.360262] omap_voltage_late_init: Voltage driver support not added [01:16:11:30:48][ 2.367168] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [01:16:11:30:48][ 2.373377] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [01:16:11:30:48][ 2.380087] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [01:16:11:30:48][ 2.386297] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [01:16:11:30:48][ 2.393627] Power Management for TI OMAP4+ devices. [01:16:11:30:48][ 2.398757] Registering SWP/SWPB emulation handler [01:16:11:30:48][ 2.404884] dmm 4e000000.dmm: workaround for errata i878 in use [01:16:11:30:48][ 2.412421] dmm 4e000000.dmm: initialized all PAT entries [01:16:11:30:48][ 2.418862] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1 [01:16:11:30:48][ 2.436689] hctosys: unable to open rtc device (rtc0) [01:16:11:30:48][ 2.453712] evm_1v8: disabling [01:16:11:30:48][ 2.454030] mmc0: host does not support reading read-only switch, assuming write-enable [01:16:11:30:48][ 2.455899] mmc0: new high speed SDHC card at address 0001 [01:16:11:30:48][ 2.466448] mmcblk0: mmc0:0001 SD16G 14.6 GiB [01:16:11:30:48][ 2.471229] mmcblk0: p1 p2 [01:16:11:30:48][ 2.477674] aic_dvdd: disabling [01:16:11:30:48][ 2.481016] ldousb: disabling [01:16:11:30:48][ 2.484518] ALSA device list: [01:16:11:30:48][ 2.487519] No soundcards found. [01:16:11:30:48][ 2.492461] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [01:16:11:30:48][ 2.501247] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [01:16:11:30:48][ 2.712840] EXT4-fs (mmcblk0p2): recovery complete [01:16:11:30:48][ 2.720446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [01:16:11:30:48][ 2.728623] VFS: Mounted root (ext4 filesystem) on device 179:2. [01:16:11:30:48][ 2.738051] devtmpfs: mounted [01:16:11:30:48][ 2.741244] Freeing unused kernel memory: 336K [01:16:11:30:48][ 2.745708] This architecture does not have kernel memory protection. [01:16:11:30:48][ 2.963886] systemd[1]: System time before build time, advancing clock. [01:16:11:30:48][ 3.011707] random: systemd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [01:16:11:30:48][ 3.025860] random: systemd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [01:16:11:30:48][ 3.037718] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [01:16:11:30:49][ 3.056247] systemd[1]: Detected architecture arm. [01:16:11:30:49] [01:16:11:30:49]Welcome to Arago 2016.12! [01:16:11:30:49] [01:16:11:30:49][ 3.078205] systemd[1]: Set hostname to <dra7xx-evm>. [01:16:11:30:49][ 3.144914] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [01:16:11:30:49][ 3.169078] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [01:16:11:30:49][ 3.179367] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [01:16:11:30:49][ 3.193210] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [01:16:11:30:49][ 3.208781] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [01:16:11:30:49][ 3.297429] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [01:16:11:30:49][ 3.306976] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [01:16:11:30:49][ 3.316903] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [01:16:11:30:49][ 3.626136] systemd[1]: Configuration file /etc/systemd/system/multi-user.target.wants/vsdk.service is marked executable. Please remove executable permission bits. Proceeding anyway. [01:16:11:30:49][ 3.643559] systemd[1]: [/etc/systemd/system/multi-user.target.wants/vsdk.service:3] Failed to add dependency on rc.pvr, ignoring: Invalid argument [01:16:11:30:49][ 3.775453] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [01:16:11:30:49][ 3.783275] systemd[1]: sysinit.target: Found dependency on alignment.service/start [01:16:11:30:49][ 3.791016] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [01:16:11:30:49][ 3.798475] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [01:16:11:30:49][ 3.807970] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [01:16:11:30:49][ SKIP ] Ordering cycle found, skipping alignment.service [01:16:11:30:49][ 3.849363] systemd[1]: Reached target Swap. [01:16:11:30:49][ OK ] Reached target Swap. [01:16:11:30:49][ 3.878624] systemd[1]: Created slice User and Session Slice. [01:16:11:30:49][ OK ] Created slice User and Session Slice. [01:16:11:30:49][ 3.907346] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [01:16:11:30:49][ OK ] Started Dispatch Password Requests to Console Directory Watch. [01:16:11:30:49][ 3.937371] systemd[1]: Listening on Network Service Netlink Socket. [01:16:11:30:49][ OK ] Listening on Network Service Netlink Socket. [01:16:11:30:49][ 3.967239] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [01:16:11:30:49][ OK ] Listening on /dev/initctl Compatibility Named Pipe. [01:16:11:30:49][ 3.997285] systemd[1]: Listening on Journal Socket. [01:16:11:30:49][ OK ] Listening on Journal Socket. [01:16:11:30:49][ 4.027794] systemd[1]: Created slice System Slice. [01:16:11:30:49][ OK ] Created slice System Slice. [01:16:11:30:50][ 4.097146] systemd[1]: Mounting Temporary Directory... [01:16:11:30:50] Mounting Temporary Directory... [01:16:11:30:50][ 4.116717] systemd[1]: Mounting POSIX Message Queue File System... [01:16:11:30:50] Mounting POSIX Message Queue File System... [01:16:11:30:50][ 4.149808] systemd[1]: Starting Create list of required static device nodes for the current kernel... [01:16:11:30:50] Starting Create list of required st... nodes for the current kernel... [01:16:11:30:50][ 4.168934] systemd[1]: Created slice system-serial\x2dgetty.slice. [01:16:11:30:50][ OK ] Created slice system-serial\x2dgetty.slice. [01:16:11:30:50][ 4.197204] systemd[1]: Reached target Slices. [01:16:11:30:50][ OK ] Reached target Slices. [01:16:11:30:50][ 4.247369] systemd[1]: Starting Load Kernel Modules... [01:16:11:30:50] Starting Load Kernel Modules... [01:16:11:30:50][ 4.279568] systemd[1]: Mounting Debug File System... [01:16:11:30:50] Mounting Debug File System... [01:16:11:30:50][ 4.307236] systemd[1]: Reached target Remote File Systems. [01:16:11:30:50][ OK ] Reached target Remote File Systems. [01:16:11:30:50][ 4.340045] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [01:16:11:30:50][ OK ] Started Forward Password Requests to Wall Directory Watch. [01:16:11:30:50][ 4.367154] systemd[1]: Reached target Paths. [01:16:11:30:50][ OK ] Reached target Paths. [01:16:11:30:50][ 4.387276] systemd[1]: Listening on Syslog Socket. [01:16:11:30:50][ OK ] Listening on Syslog Socket. [01:16:11:30:50][ 4.407202] systemd[1]: Listening on udev Kernel Socket. [01:16:11:30:50][ OK ] Listening on udev Kernel Socket. [01:16:11:30:50][ 4.437887] systemd[1]: Created slice system-getty.slice. [01:16:11:30:50][ OK ] Created slice system-getty.slice. [01:16:11:30:50][ 4.467263] systemd[1]: Listening on Journal Socket (/dev/log). [01:16:11:30:50][ OK ] Listening on Journal Socket (/dev/log). [01:16:11:30:50][ 4.537401] systemd[1]: Starting Journal Service... [01:16:11:30:50] Starting Journal Service... [01:16:11:30:50][ 4.567364] systemd[1]: Listening on udev Control Socket. [01:16:11:30:50][ OK ] Listening on udev Control Socket. [01:16:11:30:50][ 4.637394] systemd[1]: Starting Setup Virtual Console... [01:16:11:30:50] Starting Setup Virtual Console... [01:16:11:30:50][ 4.670488] systemd[1]: Starting Remount Root and Kernel File Systems... [01:16:11:30:50] Starting Remount Root and Kernel File Systems... [01:16:11:30:50][ 4.692492] systemd[1]: Mounted Debug File System. [01:16:11:30:50][ 4.694980] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [01:16:11:30:50][ OK ] Mounted Debug File System. [01:16:11:30:50][ 4.727241] systemd[1]: Mounted POSIX Message Queue File System. [01:16:11:30:50][ OK ] Mounted POSIX Message Queue File System. [01:16:11:30:50][ 4.757198] systemd[1]: Mounted Temporary Directory. [01:16:11:30:50][ OK ] Mounted Temporary Directory. [01:16:11:30:50][ 4.789066] systemd[1]: Started Journal Service. [01:16:11:30:50][ OK ] Started Journal Service. [01:16:11:30:50][ OK ] Started Create list of required sta...ce nodes for the current kernel. [01:16:11:30:50][FAILED] Failed to start Load Kernel Modules. [01:16:11:30:50]See 'systemctl status systemd-modules-load.service' for details. [01:16:11:30:50][ OK ] Started Setup Virtual Console. [01:16:11:30:50][ OK ] Started Remount Root and Kernel File Systems. [01:16:11:30:51] Starting udev Coldplug all Devices... [01:16:11:30:51] Starting Apply Kernel Variables... [01:16:11:30:51] Starting Create Static Device Nodes in /dev... [01:16:11:30:51] Starting Flush Journal to Persistent Storage... [01:16:11:30:51][ OK ] Started Apply Kernel Variables. [01:16:11:30:51][ OK ] Started Create Static Device Nodes in /dev. [01:16:11:30:51][ 5.557688] systemd-journald[133]: Received request to flush runtime journal from PID 1 [01:16:11:30:51] Starting udev Kernel Device Manager... [01:16:11:30:51][ OK ] Reached target Local File Systems (Pre). [01:16:11:30:51] Mounting /media/ram... [01:16:11:30:51] Mounting /var/volatile... [01:16:11:30:51][ OK ] Mounted /var/volatile. [01:16:11:30:51][ OK ] Mounted /media/ram. [01:16:11:30:51][ OK ] Started udev Kernel Device Manager. [01:16:11:30:51][ OK ] Started Flush Journal to Persistent Storage. [01:16:11:30:51] Starting Load/Save Random Seed... [01:16:11:30:51][ OK ] Reached target Local File Systems. [01:16:11:30:51] Starting Create Volatile Files and Directories... [01:16:11:30:51][ OK ] Started Load/Save Random Seed. [01:16:11:30:51][ OK ] Started Create Volatile Files and Directories. [01:16:11:30:52][ OK ] Started udev Coldplug all Devices. [01:16:11:30:52][ 6.120393] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [01:16:11:30:52][ 6.128266] remoteproc0: 55020000.ipu is available [01:16:11:30:52][ 6.133942] remoteproc0: Note: remoteproc is still under development and considered experimental. [01:16:11:30:52][ 6.155413] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [01:16:11:30:52][ 6.192079] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [01:16:11:30:52][ 6.232904] remoteproc1: 40800000.dsp is available [01:16:11:30:52][ 6.250519] remoteproc1: Note: remoteproc is still under development and considered experimental. [01:16:11:30:52][ 6.279014] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [01:16:11:30:52][ 6.302814] remoteproc1: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2 [01:16:11:30:52][ 6.311936] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [01:16:11:30:52][ 6.328630] remoteproc1: failed to load dra7-dsp1-fw.xe66 [01:16:11:30:52][ 6.340302] remoteproc2: 41000000.dsp is available [01:16:11:30:52][ 6.357782] remoteproc2: Note: remoteproc is still under development and considered experimental. [01:16:11:30:52][ 6.372319] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [01:16:11:30:52] Starting Update UTMP about System Boot/Shutdown... [01:16:11:30:52][ 6.389253] remoteproc2: Direct firmware load for dra7-dsp2-fw.xe66 failed with error -2 [01:16:11:30:52][ 6.457187] remoteproc2: failed to load dra7-dsp2-fw.xe66 [01:16:11:30:52] Starting Network Time Synchronization... [01:16:11:30:52][ 6.523853] remoteproc0: registered virtio0 (type 7) [01:16:11:30:52][ 6.534792] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [01:16:11:30:52][ 6.572527] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [01:16:11:30:52][ OK ] Found device /dev/ttyS0. [01:16:11:30:52][ OK ] Started Network Time Synchronization. [01:16:11:30:52][ 6.656472] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 [01:16:11:30:52][ OK ] Started Update UTMP about System Boot/Shutdown. [01:16:11:30:52] Starting Synchronize System and HW clocks... [01:16:11:30:52][ OK ] Reached target System Time Synchronized. [01:16:11:30:52][ OK ] Started Synchronize System and HW clocks. [01:16:11:30:53][ 7.064359] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [01:16:11:30:53][ 7.071333] CAN device driver interface [01:16:11:30:53][ 7.115482] SCSI subsystem initialized [01:16:11:30:53][ OK ] Reached target System Initialization. [01:16:11:30:53][ OK ] Listening on dropbear.socket. [01:16:11:30:53][ 7.203467] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [01:16:11:30:53][ OK ] Listening on D-Bus System Message Bus Socket. [01:16:11:30:53][ OK ] Reached target Sockets.[ 7.267307] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [01:16:11:30:53] [01:16:11:30:53][ 7.296119] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=254) [01:16:11:30:53][ OK ] Reached target Basic System. [01:16:11:30:53][ OK ] Started Kernel Logging Service. [01:16:11:30:53] Starting rc.pvr.service... [01:16:11:30:53][ OK ] Started System Logging Service. [01:16:11:30:53] Starting Login Service...[ 7.547753] [drm] Initialized pvr 1.14.3699939 20110701 on minor 2 [01:16:11:30:53] [01:16:11:30:53][ OK ] Started D-Bus System Message Bus. [01:16:11:30:53][ 7.605412] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [01:16:11:30:53][ 7.620806] ahci 4a140000.sata: Enable 32-bit DMA instead of 64-bit. [01:16:11:30:53][ 7.652057] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [01:16:11:30:53][ 7.687291] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [01:16:11:30:53][ 7.715311] EXT4-fs (nvme0n1p1): recovery complete [01:16:11:30:53][ 7.720246] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [01:16:11:30:53][ 7.731974] scsi host0: ahci [01:16:11:30:53][ 7.735212] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 240 [01:16:11:30:53][ 7.795852] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [01:16:11:30:53][ 7.900449] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [01:16:11:30:53] Starting Network Service... [01:16:11:30:53] Starting Permit User Sessions... [01:16:11:30:54][ OK ] Started Daily Cleanup of Temporary Directories. [01:16:11:30:54][ OK ] Reached target Timers. [01:16:11:30:54][ 8.107038] ata1: SATA link down (SStatus 0 SControl 300) [01:16:11:30:54][ OK ] Started Launching Vision SDK App. [01:16:11:30:54][ OK ] Started rc.pvr.service. [01:16:11:30:54][ 8.235537] net eth0: initializing cpsw version 1.15 (0) [01:16:11:30:54][ OK ] Started Permit User Sessions. [01:16:11:30:54][ 8.274531] net eth0: initialized cpsw ale version 1.4 [01:16:11:30:54][ 8.297669] net eth0: ALE Table size 1024 [01:16:11:30:54][ 8.355360] net eth0: phy found : id is : 0x2000a231 [01:16:11:30:54][ 8.386426] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [01:16:11:30:54][ OK ] Started Network Service. [01:16:11:30:54][ 8.738152] remoteproc0: powering up 55020000.ipu [01:16:11:30:54][ 8.752445] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 4396172 [01:16:11:30:54][ 8.777971] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [01:16:11:30:54][ 8.824648] remoteproc0: remote processor 55020000.ipu is now up [01:16:11:30:54][ 8.831895] virtio_rpmsg_bus virtio0: rpmsg host is online [01:16:11:30:54][ 8.875449] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [01:16:11:30:54][ 8.906618] NET: Registered protocol family 41 [01:16:11:30:55][ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [01:16:11:30:55] Starting Network Service... [01:16:11:30:55][ OK ] Started Getty on tty1. [01:16:11:30:55][ OK ] Started Serial Getty on ttyS0. [01:16:11:30:55] Starting weston.service... [01:16:11:30:55][ OK ] Started Network Service. [01:16:11:30:55][ OK ] Started weston.service. [01:16:11:30:55][ OK ] Started Login Service. [01:16:11:30:55] Starting Network Service... [01:16:11:30:55] Starting tiipclad-daemon.service... [01:16:11:30:55] Starting telnetd.service... [01:16:11:30:55][ OK ] Started Network Service. [01:16:11:30:55][ OK ] Started tiipclad-daemon.service. [01:16:11:30:55][ OK ] Started telnetd.service. [01:16:11:30:55] Starting Network Service... [01:16:11:30:55][ OK ] Started Network Service. [01:16:11:30:55] Starting Network Service... [01:16:11:30:55][ OK ] Started Network Service. [01:16:11:30:55][FAILED] Failed to listen on Network Service Bus Name. [01:16:11:30:55]See 'systemctl status org.freedesktop.network1.busname' for details. [01:16:11:30:55][FAILED] Failed to start Network Service. [01:16:11:30:55]See 'systemctl status systemd-networkd.service' for details. [01:16:11:30:55][ OK ] Reached target Network. [01:16:11:30:56] Starting Network Name Resolution... [01:16:11:30:56][ OK ] Started Network Name Resolution. [01:16:11:30:59][ 13.297828] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [01:16:11:31:01][ 15.335454] DMA: Module install successful, device major num = 241 [01:16:11:31:01][ 15.341802] DRV: Module install successful [01:16:11:31:01] [01:16:11:31:01] _____ _____ _ _ [01:16:11:31:01]| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [01:16:11:31:01]| | _| .'| . | . | | __| _| . | | | -_| _| _| [01:16:11:31:01]|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [01:16:11:31:01] |___| |___| [01:16:11:31:01] [01:16:11:31:01]Arago Project http://arago-project.org dra7xx-evm ttyS0 [01:16:11:31:01] [01:16:11:31:01]Arago 2016.12 dra7xx-evm ttyS0 [01:16:11:31:01] [01:16:11:31:01]dra7xx-evm login:
my local source code build image, serial log output: [01:16:11:29:19]U-Boot SPL 2016.05-00013-g3331a8a6168f (Jan 13 2023 - 16:42:05) [01:16:11:29:19]DRA752-GP ES2.0 [01:16:11:29:19]no pinctrl for hs200_1_8v [01:16:11:29:19]no pinctrl for ddr_1_8v [01:16:11:29:19]Card did not respond to voltage select! [01:16:11:29:19]*** Warning - MMC init failed, using default environment [01:16:11:29:19] [01:16:11:29:19]Trying to boot from MMC1 [01:16:11:29:19]reading dra7-ipu2-fw.lzop [01:16:11:29:19]spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 [01:16:11:29:19]spl: error reading image dra7-ipu2-fw.lzop, err - -1 [01:16:11:29:19]Error loading remotecore IPU2!,Continuing with boot ... [01:16:11:29:19]reading dra7-dsp1-fw.lzop [01:16:11:29:19]spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 [01:16:11:29:19]spl: error reading image dra7-dsp1-fw.lzop, err - -1 [01:16:11:29:19]Error loading remotecore DSP1!,Continuing with boot ... [01:16:11:29:19]reading dra7-dsp2-fw.lzop [01:16:11:29:19]spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 [01:16:11:29:19]spl: error reading image dra7-dsp2-fw.lzop, err - -1 [01:16:11:29:19]Error loading remotecore DSP2!,Continuing with boot ... [01:16:11:29:19]reading dra7-ipu1-fw.lzop [01:16:11:29:19]spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 [01:16:11:29:19]spl: error reading image dra7-ipu1-fw.lzop, err - -1 [01:16:11:29:19]Error loading remotecore IPU1!,Continuing with boot ... [01:16:11:29:19]spl: falcon_args_file not set in environment, falling back to default [01:16:11:29:19]reading single-stage-boot.dtb [01:16:11:29:19]spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1 [01:16:11:29:19]reading u-boot.img [01:16:11:29:19]reading u-boot.img [01:16:11:29:19]reading u-boot.img [01:16:11:29:19]reading u-boot.img [01:16:11:29:20] [01:16:11:29:20] [01:16:11:29:20]U-Boot 2016.05-00013-g3331a8a6168f (Jan 13 2023 - 16:42:05 -0800) [01:16:11:29:20] [01:16:11:29:20]CPU : DRA752-GP ES2.0 [01:16:11:29:20]Model: TI DRA742 [01:16:11:29:20]Board: DRA74x EVM REV H.4 [01:16:11:29:20]DRAM: 4 GiB [01:16:11:29:20]MMC: i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:20]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:20]OMAP SD/MMC: 0, OMAP SD/MMC: 1 [01:16:11:29:20]Card did not respond to voltage select! [01:16:11:29:20]*** Warning - MMC init failed, using default environment [01:16:11:29:20] [01:16:11:29:20]Card did not respond to voltage select! [01:16:11:29:20]ERROR: invalid mmc device [01:16:11:29:20] [01:16:11:29:20]at arch/arm/cpu/armv7/omap-common/utils.c:193/mmc_get_part_size() [01:16:11:29:20]Warning: fastboot.userdata_size: unable to calc [01:16:11:29:20]SCSI: SATA link 0 timeout. [01:16:11:29:20]AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [01:16:11:29:20]flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst [01:16:11:29:20]scanning bus for devices... [01:16:11:29:20]Found 0 device(s). [01:16:11:29:20]Net: Could not get PHY for ethernet@48484000: addr 2 [01:16:11:29:20] [01:16:11:29:20]Warning: ethernet@48484000 using MAC address from ROM [01:16:11:29:20]eth0: ethernet@48484000 [01:16:11:29:22]Hit any key to stop autoboot: 0 [01:16:11:29:22]## Error: "board_findfdt" not defined [01:16:11:29:22]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:22]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:22]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:22]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:22]switch to partitions #0, OK [01:16:11:29:22]mmc0 is current device [01:16:11:29:22]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:22]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:22]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:22]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:22]SD/MMC found on device 0 [01:16:11:29:22]reading boot.scr [01:16:11:29:22]** Unable to read file boot.scr ** [01:16:11:29:22]reading uEnv.txt [01:16:11:29:22]182 bytes read in 2 ms (88.9 KiB/s) [01:16:11:29:22]Loaded env from uEnv.txt [01:16:11:29:22]Importing environment from mmc0 ... [01:16:11:29:22]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:22]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:22]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:22]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:23]switch to partitions #0, OK [01:16:11:29:23]mmc0 is current device [01:16:11:29:23]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:23]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:23]i2c_write: error waiting for data ACK (status=0x116) [01:16:11:29:23]pcf8575_i2c_write_le16 i2c write failed to addr 21 [01:16:11:29:23]SD/MMC found on device 0 [01:16:11:29:23]3560440 bytes read in 182 ms (18.7 MiB/s) [01:16:11:29:23]107664 bytes read in 32 ms (3.2 MiB/s) [01:16:11:29:23]Booting from mmc0 ... [01:16:11:29:23]Kernel image @ 0x82000000 [ 0x000000 - 0x3653f8 ] [01:16:11:29:23]## Flattened Device Tree blob at 88000000 [01:16:11:29:23] Booting using the fdt blob at 0x88000000 [01:16:11:29:23] Loading Device Tree to 8ffe2000, end 8ffff48f ... OK [01:16:11:29:23] [01:16:11:29:23]Starting kernel ... [01:16:11:29:23] [01:16:11:29:25][ 0.000000] Booting Linux on physical CPU 0x0 [01:16:11:29:25][ 0.000000] Initializing cgroup subsys cpuset [01:16:11:29:25][ 0.000000] Initializing cgroup subsys cpu [01:16:11:29:25][ 0.000000] Initializing cgroup subsys cpuacct [01:16:11:29:25][ 0.000000] Linux version 4.4.84-00034-gaa42c960d12c (herry@ubuntu) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Fri Jan 13 16:53:26 PST 2023 [01:16:11:29:25][ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [01:16:11:29:25][ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [01:16:11:29:25][ 0.000000] Machine model: TI DRA742 [01:16:11:29:25][ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [01:16:11:29:25][ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [01:16:11:29:25][ 0.000000] Reserved memory: regions without no-map are not yet supported [01:16:11:29:25][ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [01:16:11:29:25][ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [01:16:11:29:26][ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [01:16:11:29:26][ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [01:16:11:29:26][ 0.000000] Reserved memory: regions without no-map are not yet supported [01:16:11:29:26][ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [01:16:11:29:26][ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [01:16:11:29:26][ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [01:16:11:29:26][ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [01:16:11:29:26][ 0.000000] Reserved memory: regions without no-map are not yet supported [01:16:11:29:26][ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [01:16:11:29:26][ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [01:16:11:29:26][ 0.000000] cma: Reserved 64 MiB at 0x00000000bbc00000 [01:16:11:29:26][ 0.000000] Forcing write-allocate cache policy for SMP [01:16:11:29:26][ 0.000000] Memory policy: Data cache writealloc [01:16:11:29:26][ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [01:16:11:29:26][ 0.000000] DRA752 ES2.0 [01:16:11:29:26][ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62a000 s14912 r8192 d21952 u45056 [01:16:11:29:26][ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243264 [01:16:11:29:26][ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=74cc6af2-02 rw rootwait ip=none mem=1024M cma=64M [01:16:11:29:26][ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [01:16:11:29:26][ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [01:16:11:29:26][ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [01:16:11:29:26][ 0.000000] Memory: 369860K/979968K available (6635K kernel code, 320K rwdata, 2392K rodata, 336K init, 290K bss, 364348K reserved, 245760K cma-reserved, 193536K highmem) [01:16:11:29:26][ 0.000000] Virtual kernel memory layout: [01:16:11:29:26][ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [01:16:11:29:26][ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [01:16:11:29:26][ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [01:16:11:29:26][ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [01:16:11:29:26][ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [01:16:11:29:26][ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [01:16:11:29:26][ 0.000000] .text : 0xc0008000 - 0xc08d902c (9029 kB) [01:16:11:29:26][ 0.000000] .init : 0xc08da000 - 0xc092e000 ( 336 kB) [01:16:11:29:26][ 0.000000] .data : 0xc092e000 - 0xc097e120 ( 321 kB) [01:16:11:29:26][ 0.000000] .bss : 0xc0980000 - 0xc09c8800 ( 290 kB) [01:16:11:29:26][ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [01:16:11:29:26][ 0.000000] Preemptible hierarchical RCU implementation. [01:16:11:29:26][ 0.000000] Build-time adjustment of leaf fanout to 32. [01:16:11:29:26][ 0.000000] NR_IRQS:16 nr_irqs:16 16 [01:16:11:29:26][ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [01:16:11:29:26][ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [01:16:11:29:26][ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [01:16:11:29:26][ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [01:16:11:29:26][ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [01:16:11:29:26][ 0.000016] Switching to timer-based delay loop, resolution 162ns [01:16:11:29:26][ 0.000328] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [01:16:11:29:26][ 0.000336] OMAP clocksource: 32k_counter at 32768 Hz [01:16:11:29:26][ 0.000776] Console: colour dummy device 80x30 [01:16:11:29:26][ 0.000792] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [01:16:11:29:26][ 0.000798] This ensures that you still see kernel messages. Please [01:16:11:29:26][ 0.000803] update your kernel commandline. [01:16:11:29:26][ 0.000816] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [01:16:11:29:26][ 0.000829] pid_max: default: 32768 minimum: 301 [01:16:11:29:26][ 0.000927] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [01:16:11:29:26][ 0.000937] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [01:16:11:29:26][ 0.001476] Initializing cgroup subsys io [01:16:11:29:26][ 0.001493] Initializing cgroup subsys memory [01:16:11:29:26][ 0.001517] Initializing cgroup subsys devices [01:16:11:29:26][ 0.001530] Initializing cgroup subsys freezer [01:16:11:29:26][ 0.001542] Initializing cgroup subsys perf_event [01:16:11:29:26][ 0.001554] Initializing cgroup subsys pids [01:16:11:29:26][ 0.001580] CPU: Testing write buffer coherency: ok [01:16:11:29:26][ 0.001779] /cpus/cpu@0 missing clock-frequency property [01:16:11:29:26][ 0.001795] /cpus/cpu@1 missing clock-frequency property [01:16:11:29:26][ 0.001805] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [01:16:11:29:26][ 0.001841] Setting up static identity map for 0x80008380 - 0x800083e0 [01:16:11:29:26][ 0.080064] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [01:16:11:29:26][ 0.080134] Brought up 2 CPUs [01:16:11:29:26][ 0.080147] SMP: Total of 2 processors activated (24.59 BogoMIPS). [01:16:11:29:26][ 0.080154] CPU: All CPU(s) started in HYP mode. [01:16:11:29:26][ 0.080159] CPU: Virtualization extensions available. [01:16:11:29:26][ 0.080533] devtmpfs: initialized [01:16:11:29:26][ 0.109583] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [01:16:11:29:26][ 0.110549] omap_hwmod: l3_main_2 using broken dt data from ocp [01:16:11:29:26][ 0.313996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [01:16:11:29:26][ 0.314020] futex hash table entries: 512 (order: 3, 32768 bytes) [01:16:11:29:26][ 0.318966] pinctrl core: initialized pinctrl subsystem [01:16:11:29:26][ 0.319849] NET: Registered protocol family 16 [01:16:11:29:26][ 0.320819] DMA: preallocated 256 KiB pool for atomic coherent allocations [01:16:11:29:26][ 0.350234] cpuidle: using governor ladder [01:16:11:29:26][ 0.380255] cpuidle: using governor menu [01:16:11:29:26][ 0.388837] OMAP GPIO hardware version 0.1 [01:16:11:29:26][ 0.392777] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [01:16:11:29:26][ 0.408268] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [01:16:11:29:26][ 0.408282] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [01:16:11:29:26][ 0.417405] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [01:16:11:29:26][ 0.417415] hw-breakpoint: maximum watchpoint size is 8 bytes. [01:16:11:29:26][ 0.417873] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [01:16:11:29:26][ 0.417882] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [01:16:11:29:26][ 0.418450] OMAP DMA hardware revision 0.0 [01:16:11:29:26][ 0.461422] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [01:16:11:29:26][ 0.462555] edma 43300000.edma: memcpy is disabled [01:16:11:29:26][ 0.467253] edma 43300000.edma: TI EDMA DMA engine driver [01:16:11:29:26][ 0.471315] omap-iommu 40d01000.mmu: 40d01000.mmu registered [01:16:11:29:26][ 0.471501] omap-iommu 40d02000.mmu: 40d02000.mmu registered [01:16:11:29:26][ 0.471662] omap-iommu 58882000.mmu: 58882000.mmu registered [01:16:11:29:26][ 0.471822] omap-iommu 55082000.mmu: 55082000.mmu registered [01:16:11:29:26][ 0.472098] omap-iommu 41501000.mmu: 41501000.mmu registered [01:16:11:29:26][ 0.472297] omap-iommu 41502000.mmu: 41502000.mmu registered [01:16:11:29:26][ 0.475312] palmas 0-0058: IRQ missing: skipping irq request [01:16:11:29:26][ 0.490782] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [01:16:11:29:26][ 0.562672] pcf857x: probe of 0-0020 failed with error -121 [01:16:11:29:26][ 0.562928] pcf857x: probe of 0-0021 failed with error -121 [01:16:11:29:26][ 0.563785] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [01:16:11:29:26][ 0.564198] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [01:16:11:29:26][ 0.564394] media: Linux media interface: v0.10 [01:16:11:29:26][ 0.564445] Linux video capture interface: v2.00 [01:16:11:29:26][ 0.564485] pps_core: LinuxPPS API ver. 1 registered [01:16:11:29:26][ 0.564493] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [01:16:11:29:26][ 0.564521] PTP clock support registered [01:16:11:29:26][ 0.564564] EDAC MC: Ver: 3.0.0 [01:16:11:29:26][ 0.565314] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [01:16:11:29:26][ 0.565608] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [01:16:11:29:26][ 0.565950] Advanced Linux Sound Architecture Driver Initialized. [01:16:11:29:26][ 0.566831] clocksource: Switched to clocksource arch_sys_counter [01:16:11:29:26][ 0.577465] NET: Registered protocol family 2 [01:16:11:29:26][ 0.577958] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [01:16:11:29:26][ 0.578022] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [01:16:11:29:26][ 0.578146] TCP: Hash tables configured (established 8192 bind 8192) [01:16:11:29:26][ 0.578193] UDP hash table entries: 512 (order: 2, 16384 bytes) [01:16:11:29:26][ 0.578225] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [01:16:11:29:26][ 0.578371] NET: Registered protocol family 1 [01:16:11:29:26][ 0.578655] RPC: Registered named UNIX socket transport module. [01:16:11:29:26][ 0.578664] RPC: Registered udp transport module. [01:16:11:29:26][ 0.578670] RPC: Registered tcp transport module. [01:16:11:29:26][ 0.578676] RPC: Registered tcp NFSv4.1 backchannel transport module. [01:16:11:29:26][ 0.579656] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [01:16:11:29:26][ 0.589787] squashfs: version 4.0 (2009/01/31) Phillip Lougher [01:16:11:29:26][ 0.590446] NFS: Registering the id_resolver key type [01:16:11:29:26][ 0.590479] Key type id_resolver registered [01:16:11:29:26][ 0.590487] Key type id_legacy registered [01:16:11:29:26][ 0.590555] ntfs: driver 2.1.32 [Flags: R/O]. [01:16:11:29:26][ 0.591866] bounce: pool size: 64 pages [01:16:11:29:26][ 0.592018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [01:16:11:29:26][ 0.592035] io scheduler noop registered [01:16:11:29:26][ 0.592050] io scheduler deadline registered [01:16:11:29:26][ 0.592086] io scheduler cfq registered (default) [01:16:11:29:26][ 0.597634] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [01:16:11:29:26][ 0.601110] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [01:16:11:29:26][ 0.601122] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [01:16:11:29:26][ 0.601155] IO 0x20003000..0x20012fff -> 0x00000000 [01:16:11:29:26][ 0.601175] MEM 0x20013000..0x2fffffff -> 0x20013000 [01:16:11:29:26][ 0.631167] dra7-pcie 51000000.pcie_rc: link is not up [01:16:11:29:26][ 0.631340] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [01:16:11:29:26][ 0.631352] pci_bus 0000:00: root bus resource [bus 00-ff] [01:16:11:29:26][ 0.631363] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [01:16:11:29:26][ 0.631372] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [01:16:11:29:26][ 0.631785] PCI: bus0: Fast back to back transfers disabled [01:16:11:29:26][ 0.631905] PCI: bus1: Fast back to back transfers enabled [01:16:11:29:26][ 0.631989] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [01:16:11:29:26][ 0.632004] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [01:16:11:29:26][ 0.632016] pci 0000:00:00.0: PCI bridge to [bus 01] [01:16:11:29:26][ 0.632238] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [01:16:11:29:26][ 0.692886] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [01:16:11:29:26][ 0.696276] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 202, base_baud = 3000000) is a 8250 [01:16:11:29:26][ 1.710377] console [ttyS0] enabled [01:16:11:29:26][ 1.714766] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 203, base_baud = 3000000) is a 8250 [01:16:11:29:26][ 1.724476] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 204, base_baud = 3000000) is a 8250 [01:16:11:29:26][ 1.734509] [drm] Initialized drm 1.1.0 20060810 [01:16:11:29:26][ 1.740063] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [01:16:11:29:26][ 1.746709] [drm] No driver support for vblank timestamp query. [01:16:11:29:26][ 1.752878] [drm] Initialized vdrm 1.0.0 20110917 on minor 0 [01:16:11:29:26][ 1.760027] OMAP DSS rev 6.1 [01:16:11:29:26][ 1.763782] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [01:16:11:29:26][ 1.779471] loop: module loaded [01:16:11:29:26][ 1.783020] vmemexp device MAJOR num = 245 [01:16:11:29:26][ 1.787173] vmemexp class registered [01:16:11:29:27][ 1.790891] /dev/vmemexp device registered [01:16:11:29:27][ 1.795004] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [01:16:11:29:27][ 1.800714] nand: No NAND device found [01:16:11:29:27][ 1.804484] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [01:16:11:29:27][ 1.813594] m25p80 spi32766.0: found n25q00, expected s25fl256s1 [01:16:11:29:27][ 1.819704] m25p80 spi32766.0: n25q00 (131072 Kbytes) [01:16:11:29:27][ 1.824839] 7 ofpart partitions found on MTD device spi32766.0 [01:16:11:29:27][ 1.830715] Creating 7 MTD partitions on "spi32766.0": [01:16:11:29:27][ 1.835877] 0x000000000000-0x000000040000 : "QSPI.SPL" [01:16:11:29:27][ 1.842009] 0x000000040000-0x000000140000 : "QSPI.u-boot" [01:16:11:29:27][ 1.848346] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [01:16:11:29:27][ 1.855301] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [01:16:11:29:27][ 1.861993] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [01:16:11:29:27][ 1.869387] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [01:16:11:29:27][ 1.875709] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [01:16:11:29:27][ 1.883499] libphy: Fixed MDIO Bus: probed [01:16:11:29:27][ 1.936863] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [01:16:11:29:27][ 1.942989] libphy: 48485000.mdio: probed [01:16:11:29:27][ 1.950096] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver TI DP83867 [01:16:11:29:27][ 1.959078] cpsw 48484000.ethernet: Detected MACID = b4:52:a9:3b:b1:16 [01:16:11:29:27][ 1.965723] cpsw 48484000.ethernet: cpts: overflow check period 800 [01:16:11:29:27][ 1.972718] cpsw 48484000.ethernet: cpsw: Detected MACID = b4:52:a9:3b:b1:17 [01:16:11:29:27][ 1.981370] mousedev: PS/2 mouse device common for all mice [01:16:11:29:27][ 1.987582] i2c /dev entries driver [01:16:11:29:27][ 1.996239] omap_hsmmc 4809c000.mmc: Got CD GPIO [01:16:11:29:27][ 2.037611] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [01:16:11:29:27][ 2.043996] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [01:16:11:29:27][ 2.066979] evm_3v3_sw: supplied by sysen1 [01:16:11:29:27][ 2.127659] ledtrig-cpu: registered to indicate activity on CPUs [01:16:11:29:27][ 2.137763] aic_dvdd: supplied by evm_3v3_sw [01:16:11:29:27][ 2.143020] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [01:16:11:29:27][ 2.150517] NET: Registered protocol family 10 [01:16:11:29:27][ 2.165813] sit: IPv6 over IPv4 tunneling driver [01:16:11:29:27][ 2.171030] NET: Registered protocol family 17 [01:16:11:29:27][ 2.175699] Key type dns_resolver registered [01:16:11:29:27][ 2.180146] omap_voltage_late_init: Voltage driver support not added [01:16:11:29:27][ 2.187052] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [01:16:11:29:27][ 2.193260] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [01:16:11:29:27][ 2.199963] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [01:16:11:29:27][ 2.206171] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [01:16:11:29:27][ 2.213498] Power Management for TI OMAP4+ devices. [01:16:11:29:27][ 2.218633] Registering SWP/SWPB emulation handler [01:16:11:29:27][ 2.224758] dmm 4e000000.dmm: workaround for errata i878 in use [01:16:11:29:27][ 2.232304] dmm 4e000000.dmm: initialized all PAT entries [01:16:11:29:27][ 2.238796] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1 [01:16:11:29:27][ 2.256660] hctosys: unable to open rtc device (rtc0) [01:16:11:29:27][ 2.273716] evm_1v8: disabling [01:16:11:29:27][ 2.273988] mmc0: host does not support reading read-only switch, assuming write-enable [01:16:11:29:27][ 2.275877] mmc0: new high speed SDHC card at address 0001 [01:16:11:29:27][ 2.286419] mmcblk0: mmc0:0001 SD32G 28.8 GiB [01:16:11:29:27][ 2.291126] mmcblk0: p1 p2 [01:16:11:29:27][ 2.297675] aic_dvdd: disabling [01:16:11:29:27][ 2.301037] ldousb: disabling [01:16:11:29:27][ 2.304534] ALSA device list: [01:16:11:29:27][ 2.307535] No soundcards found. [01:16:11:29:27][ 2.312518] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [01:16:11:29:27][ 2.321147] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [01:16:11:29:27][ 2.578726] EXT4-fs (mmcblk0p2): recovery complete [01:16:11:29:27][ 2.584760] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [01:16:11:29:27][ 2.592941] VFS: Mounted root (ext4 filesystem) on device 179:2. [01:16:11:29:27][ 2.599903] devtmpfs: mounted [01:16:11:29:27][ 2.603103] Freeing unused kernel memory: 336K [01:16:11:29:27][ 2.607588] This architecture does not have kernel memory protection. [01:16:11:29:28][ 2.797924] systemd[1]: System time before build time, advancing clock. [01:16:11:29:28][ 2.835004] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [01:16:11:29:28][ 2.847842] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [01:16:11:29:28][ 2.859598] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [01:16:11:29:28][ 2.878127] systemd[1]: Detected architecture arm. [01:16:11:29:28] [01:16:11:29:28]Welcome to Arago 2016.12! [01:16:11:29:28] [01:16:11:29:28][ 2.907781] systemd[1]: Set hostname to <dra7xx-evm>. [01:16:11:29:28][ 2.966649] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [01:16:11:29:28][ 3.001831] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [01:16:11:29:28][ 3.012216] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [01:16:11:29:28][ 3.022949] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [01:16:11:29:28][ 3.039537] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 21 bits of entropy available) [01:16:11:29:28][ 3.124001] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [01:16:11:29:28][ 3.133564] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [01:16:11:29:28][ 3.143597] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [01:16:11:29:28][ 3.501447] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [01:16:11:29:28][ 3.509282] systemd[1]: sysinit.target: Found dependency on alignment.service/start [01:16:11:29:28][ 3.517001] systemd[1]: sysinit.target: Found dependency on basic.target/start [01:16:11:29:28][ 3.524261] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [01:16:11:29:28][ 3.531729] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [01:16:11:29:28][ 3.541193] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [01:16:11:29:28][ SKIP ] Ordering cycle found, skipping alignment.service [01:16:11:29:28][ 3.580710] systemd[1]: Created slice System Slice. [01:16:11:29:28][ OK ] Created slice System Slice. [01:16:11:29:28][ 3.607096] systemd[1]: Reached target Swap. [01:16:11:29:28][ OK ] Reached target Swap. [01:16:11:29:28][ 3.627137] systemd[1]: Listening on Syslog Socket. [01:16:11:29:28][ OK ] Listening on Syslog Socket. [01:16:11:29:28][ 3.647032] systemd[1]: Reached target Remote File Systems. [01:16:11:29:28][ OK ] Reached target Remote File Systems. [01:16:11:29:28][ 3.677228] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [01:16:11:29:28][ OK ] Started Dispatch Password Requests to Console Directory Watch. [01:16:11:29:28][ 3.707788] systemd[1]: Created slice system-getty.slice. [01:16:11:29:28][ OK ] Created slice system-getty.slice. [01:16:11:29:28][ 3.737226] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [01:16:11:29:28][ OK ] Started Forward Password Requests to Wall Directory Watch. [01:16:11:29:28][ 3.767033] systemd[1]: Reached target Paths. [01:16:11:29:28][ OK ] Reached target Paths. [01:16:11:29:29][ 3.787107] systemd[1]: Listening on Journal Socket (/dev/log). [01:16:11:29:29][ OK ] Listening on Journal Socket (/dev/log). [01:16:11:29:29][ 3.817136] systemd[1]: Listening on udev Control Socket. [01:16:11:29:29][ OK ] Listening on udev Control Socket. [01:16:11:29:29][ 3.847253] systemd[1]: Listening on Network Service Netlink Socket. [01:16:11:29:29][ OK ] Listening on Network Service Netlink Socket. [01:16:11:29:29][ 3.877709] systemd[1]: Created slice system-serial\x2dgetty.slice. [01:16:11:29:29][ OK ] Created slice system-serial\x2dgetty.slice. [01:16:11:29:29][ 3.907169] systemd[1]: Listening on Journal Socket. [01:16:11:29:29][ OK ] Listening on Journal Socket. [01:16:11:29:29][ 3.977346] systemd[1]: Starting Create list of required static device nodes for the current kernel... [01:16:11:29:29] Starting Create list of required st... nodes for the current kernel... [01:16:11:29:29][ 4.009665] systemd[1]: Starting Remount Root and Kernel File Systems... [01:16:11:29:29] Starting Remount Root and Kernel File Systems... [01:16:11:29:29][ 4.033209] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [01:16:11:29:29][ 4.043876] systemd[1]: Starting Load Kernel Modules... [01:16:11:29:29] Starting Load Kernel Modules... [01:16:11:29:29][ 4.060243] systemd[1]: Mounting Temporary Directory... [01:16:11:29:29] Mounting Temporary Directory... [01:16:11:29:29][ 4.117230] systemd[1]: Starting Setup Virtual Console... [01:16:11:29:29] Starting Setup Virtual Console... [01:16:11:29:29][ 4.149457] systemd[1]: Mounting Debug File System... [01:16:11:29:29] Mounting Debug File System... [01:16:11:29:29][ 4.177254] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [01:16:11:29:29][ OK ] Listening on /dev/initctl Compatibility Named Pipe. [01:16:11:29:29][ 4.237268] systemd[1]: Starting Journal Service... [01:16:11:29:29] Starting Journal Service... [01:16:11:29:29][ 4.267930] systemd[1]: Created slice User and Session Slice. [01:16:11:29:29][ OK ] Created slice User and Session Slice. [01:16:11:29:29][ 4.297148] systemd[1]: Reached target Slices. [01:16:11:29:29][ OK ] Reached target Slices. [01:16:11:29:29][ 4.317217] systemd[1]: Listening on udev Kernel Socket. [01:16:11:29:29][ OK ] Listening on udev Kernel Socket. [01:16:11:29:29][ 4.377118] systemd[1]: Mounting POSIX Message Queue File System... [01:16:11:29:29] Mounting POSIX Message Queue File System... [01:16:11:29:29][ 4.404370] systemd[1]: Mounted POSIX Message Queue File System. [01:16:11:29:29][ OK ] Mounted POSIX Message Queue File System. [01:16:11:29:29][ 4.427209] systemd[1]: Mounted Debug File System. [01:16:11:29:29][ OK ] Mounted Debug File System. [01:16:11:29:29][ 4.447090] systemd[1]: Mounted Temporary Directory. [01:16:11:29:29][ OK ] Mounted Temporary Directory. [01:16:11:29:29][ 4.477296] systemd[1]: Started Journal Service. [01:16:11:29:29][ OK ] Started Journal Service. [01:16:11:29:29][ OK ] Started Create list of required sta...ce nodes for the current kernel. [01:16:11:29:29][ OK ] Started Remount Root and Kernel File Systems. [01:16:11:29:29][FAILED] Failed to start Load Kernel Modules. [01:16:11:29:29]See 'systemctl status systemd-modules-load.service' for details. [01:16:11:29:29][ OK ] Started Setup Virtual Console. [01:16:11:29:30] Starting Apply Kernel Variables... [01:16:11:29:30] Starting udev Coldplug all Devices... [01:16:11:29:30] Starting Create Static Device Nodes in /dev... [01:16:11:29:30] Starting Flush Journal to Persistent Storage... [01:16:11:29:30][ OK ] Started Apply Kernel Variables. [01:16:11:29:30][ OK ] Started Create Static Device Nodes in /dev. [01:16:11:29:30][ 5.166752] systemd-journald[139]: Received request to flush runtime journal from PID 1 [01:16:11:29:30][ OK ] Started Flush Journal to Persistent Storage. [01:16:11:29:30] Starting udev Kernel Device Manager... [01:16:11:29:30][ OK ] Reached target Local File Systems (Pre). [01:16:11:29:30] Mounting /media/ram... [01:16:11:29:30] Mounting /var/volatile... [01:16:11:29:30][ OK ] Mounted /var/volatile. [01:16:11:29:30][ OK ] Mounted /media/ram. [01:16:11:29:30][ OK ] Started udev Kernel Device Manager. [01:16:11:29:30] Starting Load/Save Random Seed... [01:16:11:29:30][ OK ] Reached target Local File Systems. [01:16:11:29:30][ 5.725775] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [01:16:11:29:30][ 5.745168] remoteproc0: 55020000.ipu is available [01:16:11:29:30][ 5.753152] remoteproc0: Note: remoteproc is still under development and considered experimental. [01:16:11:29:30] Starting Create Volatile Files and Directories...[ 5.766639] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [01:16:11:29:31] [01:16:11:29:31][ 5.794463] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [01:16:11:29:31][ OK ] Started udev Coldplug all Devices. [01:16:11:29:31][ OK ] Started Load/Save Random Seed.[ 5.824135] remoteproc1: 40800000.dsp is available [01:16:11:29:31] [01:16:11:29:31][ 5.844516] remoteproc1: Note: remoteproc is still under development and considered experimental. [01:16:11:29:31][ OK ] Started Create Volatile Files and Directories.[ 5.861890] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [01:16:11:29:31] [01:16:11:29:31][ 5.892968] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [01:16:11:29:31][ 5.931536] remoteproc2: 41000000.dsp is available [01:16:11:29:31][ 5.961478] remoteproc2: Note: remoteproc is still under development and considered experimental. [01:16:11:29:31][ 6.003474] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [01:16:11:29:31][ 6.021792] remoteproc1: registered virtio0 (type 7) [01:16:11:29:31][ OK ] Found device /dev/ttyS0. [01:16:11:29:31][ 6.100583] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [01:16:11:29:31][ 6.133158] remoteproc2: registered virtio1 (type 7) [01:16:11:29:31][ 6.180139] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [01:16:11:29:31] Starting Update UTMP about System Boot/Shutdown... [01:16:11:29:31] Starting Network Time Synchronization... [01:16:11:29:31][ 6.262899] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 [01:16:11:29:31][ 6.373897] remoteproc0: registered virtio2 (type 7) [01:16:11:29:31][ 6.525703] SCSI subsystem initialized [01:16:11:29:31][ OK ] Started Update UTMP about System Boot/Shutdown. [01:16:11:29:31][ 6.560704] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [01:16:11:29:31][ 6.574863] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [01:16:11:29:31][ 6.591672] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [01:16:11:29:31][ OK ] Started Network Time Synchronization. [01:16:11:29:31][ 6.645236] CAN device driver interface [01:16:11:29:31] Starting Synchronize System and HW clocks... [01:16:11:29:31][ OK ] Reached target System Time Synchronized. [01:16:11:29:32][ 6.784812] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=254) [01:16:11:29:32][ OK ] Started Synchronize System and HW clocks. [01:16:11:29:32][ 6.938501] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [01:16:11:29:32][ 6.945268] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [01:16:11:29:32][ OK ] Reached target System Initialization.[ 6.962972] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [01:16:11:29:32] [01:16:11:29:32][ OK ] Started Daily Cleanup of Temporary Directories. [01:16:11:29:32][ 7.001278] scsi host0: ahci [01:16:11:29:32][ 7.007327] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 240 [01:16:11:29:32][ OK ] Reached target Timers. [01:16:11:29:32][ OK ] Listening on D-Bus System Message Bus Socket. [01:16:11:29:32][ OK ] Listening on dropbear.socket. [01:16:11:29:32][ OK ] Reached target Sockets. [01:16:11:29:32][ OK ] Reached target Basic System.[ 7.113174] [drm] Initialized pvr 1.14.3699939 20110701 on minor 2 [01:16:11:29:32] [01:16:11:29:32] Starting Permit User Sessions... [01:16:11:29:32][ OK ] Started Kernel Logging Service. [01:16:11:29:32][ OK ] Started System Logging Service. [01:16:11:29:32] Starting Login Service... [01:16:11:29:32] Starting rc.pvr.service... [01:16:11:29:32][ OK ] Started D-Bus System Message Bus. [01:16:11:29:32][ 7.387112] ata1: SATA link down (SStatus 0 SControl 300) [01:16:11:29:32][ 7.489593] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [01:16:11:29:32] Starting Network Service... [01:16:11:29:32][ OK ] Started Permit User Sessions. [01:16:11:29:33][ 7.769174] net eth1: initializing cpsw version 1.15 (0) [01:16:11:29:33][ 7.788893] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [01:16:11:29:33][ 7.801236] net eth0: initialized cpsw ale version 1.4 [01:16:11:29:33][ OK ] Started Network Service. [01:16:11:29:33][ 7.817748] net eth0: ALE Table size 1024 [01:16:11:29:33][ 7.828044] libphy: PHY 48485000.mdio:03 not found [01:16:11:29:33][ 7.832869] net eth1: phy "48485000.mdio:03" not found on slave 1, err -19 [01:16:11:29:33][ 7.849312] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [01:16:11:29:33][ 7.867896] net eth0: initializing cpsw version 1.15 (0) [01:16:11:29:33][ OK ] Started rc.pvr.service. [01:16:11:29:33][ 7.888081] net eth0: phy found : id is : 0x2000a231 [01:16:11:29:33][ 7.921654] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [01:16:11:29:33][ 8.361861] remoteproc1: powering up 40800000.dsp [01:16:11:29:33][ 8.371087] remoteproc1: Booting fw image dra7-dsp1-fw.xe66, size 606416 [01:16:11:29:33][ 8.409536] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [01:16:11:29:33][ 8.415439] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [01:16:11:29:33][ 8.421414] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [01:16:11:29:33][ 8.460680] remoteproc1: remote processor 40800000.dsp is now up [01:16:11:29:33][ 8.470844] virtio_rpmsg_bus virtio0: rpmsg host is online [01:16:11:29:33][ 8.478568] remoteproc2: powering up 41000000.dsp [01:16:11:29:33][ 8.488370] remoteproc2: Booting fw image dra7-dsp2-fw.xe66, size 606416 [01:16:11:29:33][ 8.502236] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [01:16:11:29:33][ 8.508130] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [01:16:11:29:33][ 8.514112] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [01:16:11:29:33][ 8.539096] ------------[ cut here ]------------ [01:16:11:29:33][ 8.539249] remoteproc2: remote processor 41000000.dsp is now up [01:16:11:29:33][ 8.549863] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x25c/0x368() [01:16:11:29:33][ 8.559211] 44000000.ocp:L3 Custom Error: MASTER DSP1_MDMA TARGET L4_PER3_P3 (Read): Data Access in User mode during Functional access [01:16:11:29:33][ 8.571345] Modules linked in: virtio_rpmsg_bus(+) bc_example(O) extcon_usb_gpio pvrsrvkm(O) ahci_platform libahci_platform libahci c_can_platform libata c_can can_dev omap_sham omap_aes_driver scsi_mod dwc3_omap extcon rtc_omap omap_rng rng_core omap_des omap_remoteproc remoteproc virtio virtio_ring sch_fq_codel [01:16:11:29:33][ 8.599405] CPU: 0 PID: 1 Comm: systemd Tainted: G O 4.4.84-00034-gaa42c960d12c #1 [01:16:11:29:33][ 8.608139] Hardware name: Generic DRA74X (Flattened Device Tree) [01:16:11:29:33][ 8.614255] Backtrace: [01:16:11:29:33][ 8.616731] [<c00131d4>] (dump_backtrace) from [<c00133d0>] (show_stack+0x18/0x1c) [01:16:11:29:33][ 8.624332] r7:c02de608 r6:200f0193 r5:00000000 r4:c094d810 [01:16:11:29:33][ 8.630054] [<c00133b8>] (show_stack) from [<c02b21a8>] (dump_stack+0x8c/0xa0) [01:16:11:29:33][ 8.637311] [<c02b211c>] (dump_stack) from [<c0035340>] (warn_slowpath_common+0x88/0xb8) [01:16:11:29:33][ 8.645434] r7:c02de608 r6:00000093 r5:00000009 r4:ef063df0 [01:16:11:29:33][ 8.651150] [<c00352b8>] (warn_slowpath_common) from [<c00353a8>] (warn_slowpath_fmt+0x38/0x40) [01:16:11:29:33][ 8.659883] r8:00000017 r7:c0841d48 r6:00000002 r5:c0841980 r4:c0841a24 [01:16:11:29:33][ 8.666656] [<c0035374>] (warn_slowpath_fmt) from [<c02de608>] (l3_interrupt_handler+0x25c/0x368) [01:16:11:29:33][ 8.675563] r3:ef1f5f00 r2:c0841a24 [01:16:11:29:33][ 8.679165] r4:80080003 [01:16:11:29:33][ 8.681720] [<c02de3ac>] (l3_interrupt_handler) from [<c0080c28>] (handle_irq_event_percpu+0xb4/0x160) [01:16:11:29:33][ 8.691063] r10:c097d38b r9:ef1f6300 r8:00000017 r7:00000000 r6:00000000 r5:ef1f6360 [01:16:11:29:33][ 8.698966] r4:ef20a440 [01:16:11:29:33][ 8.701521] [<c0080b74>] (handle_irq_event_percpu) from [<c0080d14>] (handle_irq_event+0x40/0x64) [01:16:11:29:33][ 8.710428] r10:006663e0 r9:00000000 r8:ef008000 r7:00000000 r6:c0935e44 r5:ef1f6360 [01:16:11:29:33][ 8.718329] r4:ef1f6300 [01:16:11:29:33][ 8.720883] [<c0080cd4>] (handle_irq_event) from [<c0084058>] (handle_fasteoi_irq+0xc0/0x194) [01:16:11:29:33][ 8.729441] r7:00000000 r6:c0935e44 r5:ef1f6360 r4:ef1f6300 [01:16:11:29:33][ 8.735157] [<c0083f98>] (handle_fasteoi_irq) from [<c0080254>] (generic_handle_irq+0x2c/0x3c) [01:16:11:29:33][ 8.743803] r7:00000000 r6:00000000 r5:00000017 r4:c092b424 [01:16:11:29:33][ 8.749522] [<c0080228>] (generic_handle_irq) from [<c008052c>] (__handle_domain_irq+0x64/0xbc) [01:16:11:29:33][ 8.758260] [<c00804c8>] (__handle_domain_irq) from [<c000948c>] (gic_handle_irq+0x40/0x7c) [01:16:11:29:33][ 8.766644] r9:00000000 r8:fa213000 r7:fa212000 r6:ef063fb0 r5:fa21200c r4:c09308ec [01:16:11:29:33][ 8.774464] [<c000944c>] (gic_handle_irq) from [<c00141a8>] (__irq_usr+0x48/0x60) [01:16:11:29:34][ 8.781976] Exception stack(0xef063fb0 to 0xef063ff8) [01:16:11:29:34][ 8.787048] 3fa0: 00000000 b6ef47ac 00000000 00000000 [01:16:11:29:34][ 8.795262] 3fc0: 006ac5a8 b6ef47a8 00000010 00000000 006ac5b0 00000000 006663e0 ffffffef [01:16:11:29:34][ 8.803475] 3fe0: 00000000 beb75870 beb75894 b6e5c14e 600f0030 ffffffff [01:16:11:29:34][ 8.810114] r9:00000000 r8:30c5387d r7:30c5387d r6:ffffffff r5:600f0030 r4:b6e5c14e [01:16:11:29:34][ 8.817931] ---[ end trace 2b00b2596f677c18 ]--- [01:16:11:29:34][ 8.828833] virtio_rpmsg_bus virtio1: rpmsg host is online [01:16:11:29:34][ 8.847820] remoteproc0: powering up 55020000.ipu [01:16:11:29:34][ 8.878213] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 7652492 [01:16:11:29:34][ 8.885215] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [01:16:11:29:34][ 8.926415] remoteproc0: remote processor 55020000.ipu is now up [01:16:11:29:34][ 8.934203] virtio_rpmsg_bus virtio2: rpmsg host is online [01:16:11:29:34][ OK ] Started Login Service. [01:16:11:29:34][ 9.139993] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x50 [01:16:11:29:34][ 9.153806] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [01:16:11:29:34][ 9.161495] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x50 [01:16:11:29:34][ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.[ 9.181433] NET: Registered protocol family 41 [01:16:11:29:34] [01:16:11:29:34] Starting weston.service... [01:16:11:29:34][ OK ] Reached target Network. [01:16:11:29:34] Starting Network Name Resolution... [01:16:11:29:34][ OK ] Started Serial Getty on ttyS0. [01:16:11:29:34][ OK ] Started Getty on tty1. [01:16:11:29:34][ OK ] Started weston.service. [01:16:11:29:34][ OK ] Started Network Name Resolution. [01:16:11:29:34] Starting tiipclad-daemon.service... [01:16:11:29:34] Starting telnetd.service... [01:16:11:29:34][ OK ] Started tiipclad-daemon.service. [01:16:11:29:34][ OK ] Started telnetd.service. [01:16:11:29:40] [01:16:11:29:40] _____ _____ _ _ [01:16:11:29:40]| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [01:16:11:29:40]| | _| .'| . | . | | __| _| . | | | -_| _| _| [01:16:11:29:40]|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [01:16:11:29:40] |___| |___| [01:16:11:29:40] [01:16:11:29:40]Arago Project http://arago-project.org dra7xx-evm ttyS0 [01:16:11:29:40] [01:16:11:29:40]Arago 2016.12 dra7xx-evm ttyS0 [01:16:11:29:40]
您好！
查看 u-boot 日志、u-boot 版本显示为2016.05。
您可以从以下位置访问 SDK 和源代码： http://downloads.ti.com/infotainment/esd/jacinto6/processor-sdk-linux-automotive/03_04_00_03/index_FDS.html
请注意、这是一个很旧(5年以上)的 SDK、您可能会在设置 SDK 时遇到问题、并且支持有限。 我们不建议在任何新的开发中使用此功能。
此致
Karthik
