主题中讨论的其他部件:LPSTK-CC1352R、 SysConfig
您好!
我使用 LAUNCHXL-CC1352P 和 LPSTK-CC1352R 开发低于1GHz 的通信平台。
我使用了您的传感器和收集器示例来获取 TI 15.4堆栈。
我想在 LPSTK-CC1352R 的 GPIO 上添加传感器输入和传动器输出、但我无法这么做。
例如、每次从 LPSTK-CC1352R 发送消息时、我希望 LED 闪烁:
我标识了 GPIO_write 函数、并在 sensor.c 中包含的 sendSensorMessage 中调用了该函数、但在编译结束时会出现以下错误:exected an expression.
我不理解、因为我调用得很好:#include 我通过 SysConfig 创建了一个新变量 CONFIG_GPIO_new_LED。
您是否有任何建议、以便我可以开始开发我的应用?
还是添加符合传感器收集器原理的代码?
请帮帮我
祝你度过美好的一天!
Corentin