• 状态 Resolved
  • 已锁定 已锁定
  • 回复 10 回复
  • 订户 32 订户
  • 视图 3990 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

F28377 SCI烧写问题请教？

user5195598
Intellectual 830 points

1、使用SCIA烧写F28377D，使用C2Prog.exe，V1.7版本

2、烧写过程中出现下面提示：

*** PLEASE RESET TARGET IN SCI BOOT-LOADER MODE ***
Connecting with target (autobaud)...  OK.
Bootloading...  OK.
Please wait...
Connecting with target...  failed (no response)!

这是为什么，把USB转TTL的线缆换了两种现象都差不多；

谢谢---