This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Original question:
TMS320F28377D: 使用C2000 Ware的例程，修改代码后保存，build project后为什么会自动恢复为修改前的代码？
280049库的例程全是关与CANA_BASE的,我想要CANB的例程，请问是否有相关的例程可以提供给我一份，如果可以请发送到我的邮箱。谢谢了！
你好，没有CAN_B的例程，只能自己基于CAN_A基础上修改GPIO引脚和对应的寄存器。
