Other Parts Discussed in Thread: TMS320F28035, C2000WARE
Build没有问题
但Debud後就出现以下错误:
C28xx: GEL Output:
ADC Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Warning: The configured device (TMS320F28335), does not match the detected device (TMS320F28035). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:
ADC Calibration not complete, check if device is unlocked and recalibrate.C28xx: File Loader: Verification failed: Values at address 0x082C9@Program do not match Please verify target memory and memory map.
C28xx: GEL: File: C:\Users\Rong\workspace_v11\HVACI_Sensorless_2833x\F2833x_RAM\HVACI_Sensorless_2833x.out: a data verification error occurred, file load failed.
请问有相关经验的人如解决
有试过用F28035是可行的可以跑
但换成F28335却不行
有在Test connection有侦测到并有成功
不知道是有哪里设置没有弄好
请各位大神指教
