If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
BQ78350 -R1 写入数据时：a read data written failed comparison 无法写入数据
If the bq76940 evaluation software shows cell voltages for all cells you probably have good connection. Do not attempt to run both softwares at the same time or the bq76940 software with the gauge.
You don't indicate the value of AFE Cell Map, but indicate 1 cell, so it is probably 0x0001. If this is the case the ADC will not allow a high enough value of a single cell to meet the data flash write value. You will will be locked out of configuration changes and will need to re-program firmware. Find the firmware file for bq78350-R1 on the website and program the part. Restart bqStudio after programming, then set parameters. Be sure the bq76940 software is not running when programming, configuring, or running the bq78350.
