AM62L-FREERTOS-SDK: AM62L freertos sdk boot from spi flash

XQ ZHAO

Part Number: AM62L-FREERTOS-SDK
Other Parts Discussed in Thread: AM62L

There is no corresponding boot source code and routines in the AM62L FreeRTOS SDK. Could you please inform me if there are corresponding routines and documentation for booting from SPI flash when using the FreeRTOS SDK on AM62L? Thank you.

2 个月前

+1 Lydia 2 个月前

TI__Mastermind 46155 points

Hello, we have received your case and the investigation will take some time. Thank you for your patience.

+1 Lydia 2 个月前

TI__Mastermind 46155 points

Hi，

Please refer to this link，software-dl.ti.com/.../UG-QSPI.html

+1 XQ ZHAO 2 个月前

Prodigy 10 points

Thank you for your reply. I am using FreeRTOS, and the link you provided seems to be related to U-Boot; moreover, there are no source code examples included.

0 Lydia 2 个月前回复 XQ ZHAO

TI__Mastermind 46155 points

Hi,

Support for SBL or any other similar boot code is not added in the FreeRTOS SDK for AM62L, because in case of AM62L, ROM supports dual stage boot, so you can utilize RBL to boot your application as well:

https://software-dl.ti.com/mcu-plus-sdk/esd/AM62LX/latest/exports/docs/api_guide_am62lx/BOOTFLOW_GUIDE.html

You can flash the Pre-bl at 0x0 offset, (it is located at tools/boot/sbl_prebuilt/am62lx-evm/tiboot3.bin), and flash your application image at 0x80000 offset, to boot from OSPI using ROM Bootloader.

处理器

处理器论坛

AM62L-FREERTOS-SDK: AM62L freertos sdk boot from spi flash