软件:CCS6
芯片:5509A
flash:AT45DB161D-MU——SPI_24bit地址
现象:可以读出flash的ID,那么也说明可以向flash下载程序,即flash和dsp通信正常。
问题1:断电上电,不能从flash启动。bootmode正确。
问题2:如果BootLoader mode设置正确的话(设置从24bit flash启动),上电检测dsp的GPIO4,GPIO4脚电压是不是应该为高?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
软件:CCS6
芯片:5509A
flash:AT45DB161D-MU——SPI_24bit地址
现象:可以读出flash的ID,那么也说明可以向flash下载程序,即flash和dsp通信正常。
问题1:断电上电,不能从flash启动。bootmode正确。
问题2:如果BootLoader mode设置正确的话(设置从24bit flash启动),上电检测dsp的GPIO4,GPIO4脚电压是不是应该为高?