EZDSP5515仿真器突然连接不上，上电引导还能用，怀疑是仿真芯片坏了，如果换一块的话，需要相应的XDS100V1 Emulator配置程序吧？

板子插到PC后，电脑能识别出板子吗？

eZdsp上是xds100V2，你在配置文件里没选成xds100v1吧？

你好，板子插上后，PC能识别出来

ccxml文件，试了xds100v1和V2都不行。一直是这个错误

-----[An error has occurred and this utility has aborted]--------------------

This error is generated by TI's USCIF driver or utilities.

The value is '-151' (0xffffff69).
The title is 'SC_ERR_FTDI_OPEN'.

The explanation is:
One of the FTDI driver functions used during
the connect returned bad status or an error.
The cause may one or more of: invalid emulator serial number,
blank emulator EEPROM, missing FTDI drivers, faulty USB cable.
Use the xds100serial command-line utility in the 'common/uscif'
folder to verify the emulator can be located.

[End]

仿真芯片摸起来有点热，应该是芯片烧了？ 买一个新的换上能直接用吗？谢谢

这个最好跟SDI公司确认一下。
http://www.spectrumdigital.com/repairs-and-returns/

好的 谢谢