This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
boot from eMMC, I don't know "Primary Boot Mode Config Pins" and "Backup Boot Mode Config Pin "
please describe the meaning and how to configure.
thank you.
cesar.
主要是对硬件管脚的配置。
您可以参照开发板上的设计。
https://www.ti.com/lit/ug/spruj21c/spruj21c.pdf
请参考TRM 4.3 Boot Mode Pins.
以下链接的FAQ也可以i参考看一下。
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/950946/faq-tda4vm-how-can-i-confirm-primary-and-secondary-boot-mode-on-custom-board
Hi Nancy,
现在已经配置为eMMC引导启动；
参考是从Uboot中写入固件到emmc；
想从文件系统上写固件应该怎么操作呢
谢谢。
如果您有新的问题请另起新帖，方便其他客户查看，谢谢！
