This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
在EVM_sprr459，PROC135E2_SCH 中，3.3V这一路有load SWITCH，请问这颗SWITCH可以去掉么？ 作用是什么？ 感谢
我需要和产品线工程师确认一下后再回复您。
请看下面e2e工程师的回复。
The load switch is used to switch the main 3.3V to 3.3V_SYS used for the SoC and the attached devices.
The Load switch also performs the voltage sequencing.
With the current architecture this load switch is required for sequencing.
Can you help me understand the use case.
Hi Shine 谢谢，我不知道您有没有明白， 我是没有明白，这个回答对我来说有点笼统 比如时序的要求是什么？到底如何影响的时序？
Shine 说：Can you help me understand the use case.
您可以把您的电源设计需求说明一下，让工程师评估一下是否能去掉load switch。
Hi 其实我的需求早在第一个问题就已经已经提出来了，我还是去美国论坛去提问吧
您可以在我下面这个帖子上追问。https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1238115/sk-am62a-lp-remove-load-switch
请看下面工程师最新的回复。
Please refer below that i copied from the above note.
The Load switch control comes from the PMIC and the PMIC sequences the other supply rails used by AM62A.
